We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12 ft heavy-duty power cord with C19 and L6-30P connectors

Tripp Lite

Tripp Lite P040-012-P30 12 ft power extension cord C19 to L6-30P 20A 12AWG

SKU CH-1AA4-KT051 MPN P040-012-P30

A 12 ft heavy-duty power extension cord connects IEC-320-C19 equipment to a NEMA L6-30P outlet, rated 20A at 100-250V with 12 AWG conductors

  • TypeOthers
  • ColorBlack
  • Length0.5 ft.
  • Connector Number2
  • Connector DetailConnector A: IEC-320-C19 Connector B: NEMA L6-30P
  • SpecificationsTripp Lite Heavy-Duty C19 to L6-30P 12-ft. Power Cord. Const
  • 12 ft length places PDU outlets within reach of rack equipment
  • IEC C19 to NEMA L6-30P connectors link high-power servers to locking receptacles
  • 12 AWG three-conductor copper cable carries 20 A at 100-250 V
  • Fully moulded ends resist strain and accidental disconnection
  • RoHS compliant construction meets restricted-substance requirements

12 ft C19 to L6-30P Extension

This 12 ft power extension cord connects an IEC-320-C19 inlet to a NEMA L6-30P plug. It is built with 12 AWG copper conductors rated for 20A at 100-250V. The heavy-duty SJT jacket and fully moulded ends suit rackmount power distribution units and high-draw server equipment.

Verify Connectors and Circuit

Confirm the source outlet is a NEMA L6-30R receptacle on a 20A branch circuit. Ensure the load device accepts an IEC-60320-C19 connector. Check that the 12 ft length reaches between the outlet and the equipment without tension or sharp bends.

Passive Cable Thermal Behaviour

As a passive copper assembly it generates no operational noise. Conductor temperature rises with continuous 20A load; route the cord in open air and avoid bundling with other cables. The moulded connectors remain within specification when the circuit protection and ventilation are correct.

Highlights

  • 12 ft length places PDU outlets within reach of rack equipment
  • IEC C19 to NEMA L6-30P connectors link high-power servers to locking receptacles
  • 12 AWG three-conductor copper cable carries 20 A at 100-250 V
  • Fully moulded ends resist strain and accidental disconnection
  • RoHS compliant construction meets restricted-substance requirements

Specifications

BrandTripp Lite
ModelP040-012-P30
TypeOthers
ColorBlack
Length0.5 ft.
Connector Number2
Connector DetailConnector A: IEC-320-C19
Connector B: NEMA L6-30P
SpecificationsTripp Lite Heavy-Duty C19 to L6-30P 12-ft. Power Cord. Constructed with 3 x 12 AWG copper conductors, fully molded ends, 100-250V/20A rating.
FeaturesMolded, Heavy-Duty Power Cable, 12-ft.
IEC-60320-C19 to NEMA L6-30P
12 AWG x 3C, SJT, 20A, 100-250V
RoHS Compliant
Shipping weight0.93 kg
Package size240 × 221 × 57 mm

Questions about this item

What connectors are on the cord and do I need any extra adapters?

The cord has an IEC-60320-C19 connector on one end and a NEMA L6-30P plug on the other; no extra adapters are included or required for that connection.

How do I decide which length or gauge to pick for my rack?

This model is a single 12 ft length built with 12 AWG conductors rated for 20 A; choose it when that reach and current capacity match your equipment.

What does the 20 A rating mean when the cord is powering a server?

The 20 A rating means the cord can continuously carry up to 20 amps at 100–250 V through its 12 AWG copper conductors without overheating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.