We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-foot C19 to C20 power cord with molded connectors

Tripp Lite P036-006-15A C19 to C20 14AWG 15A 6ft international power cord

SKU CH-G2DQ-Z6GA1

Heavy-duty 14 AWG extension cord links C19 equipment to C20 PDU or UPS outlets at 15 A, 250 V over 1.83 metres

  • TypeIEC-320-C19 to IEC-320-C20
  • ColorBlack
  • Length6"
  • Connector NumberMale-to-Female
  • Terminal GenderMale to Female
  • SpecificationsTRIPP LITE, Black, 250 volts, 6, inches, Male-to-Female, fal
  • 6 ft C19 to C20 extension reaches rack-mounted gear
  • 14 AWG conductors carry 15 A at 250 V for high-power servers
  • SJTW jacket with moulded ends and strain relief resists daily stress
  • Operates from -10 °C to 60 °C at 35–85 % humidity
  • Lifetime limited warranty backed by Chicago-based technical support

Heavy-duty C19-to-C20 extension cord

This six-foot international power cord carries a C19 female connector on one end and a C20 male connector on the other, built with 14 AWG conductors and an SJTW jacket. It is rated for 15 amps at 250 volts, delivering up to 3750 watts for server, router, switch or blade enclosure power distribution.

Suited for high-current rack equipment

The cord fits installations where a PDU or UPS supplies C20 outlets and the target device requires a C19 inlet, operating reliably from -10 °C to 60 °C and 35 % to 85 % non-condensing humidity. It will not suit devices that use smaller inlets or demand a current rating above 15 A.

14 AWG conductor gauge and 15 A rating

Three 14 AWG conductors and the 15-amp rating are the decisive figures; they determine whether the cable can handle the load without excessive voltage drop or heating in your specific power chain.

Highlights

  • 6 ft C19 to C20 extension reaches rack-mounted gear
  • 14 AWG conductors carry 15 A at 250 V for high-power servers
  • SJTW jacket with moulded ends and strain relief resists daily stress
  • Operates from -10 °C to 60 °C at 35–85 % humidity
  • Lifetime limited warranty backed by Chicago-based technical support

Specifications

BrandTripp Lite
ModelP036-006-15A
TypeIEC-320-C19 to IEC-320-C20
ColorBlack
Length6"
Connector NumberMale-to-Female
Terminal GenderMale to Female
SpecificationsTRIPP LITE, Black, 250 volts, 6, inches, Male-to-Female, false
FeaturesMale-to-Female, false, 250 volts, Black, 6
Disclaimerfalse

Questions about this item

Should I choose the 6-foot length or a different size for my server rack?

The 6-foot (1.83 m) length suits most rack-to-PDU runs; select a longer cord only if the outlet is farther away.

What does the 15 A / 250 V rating mean when the cord is powering my blade enclosure?

It allows up to 15 amps at 250 volts (3750 watts) so the cable stays cool while feeding high-draw equipment.

How does the C19-to-C20 IEC-320 interface limit what I can plug in?

The C19 female end fits your device's C20 inlet, and the C20 male end plugs into a PDU or UPS C19 outlet — both rated to the same 15 A / 250 V ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.