We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black six-foot power extension cord with locking C13 to C20 connectors

Tripp Lite

Tripp Lite P032-E06 C13 to C20 Power Extension Cord 6 ft 14 Gauge

SKU CH-NRMW-MGV06 MPN P032-E06

A 1.8-metre locking C13-to-C20 extension cord rated 14 gauge for 15 A at 250 V AC, securing servers and network gear to P-Lock PDUs

  • Secure P-Lock connection prevents accidental disconnects with compatible PDUs
  • 6 ft length reduces cable clutter in tight rack enclosures
  • 14 gauge conductors support 15 A at 250 V AC for reliable power delivery
  • IEC 60320 C13 to C20 connectors fit computers, servers and network gear
  • 8 m cord provides flexible placement between device and power source

Power Extension Cord 6 ft 14 Gauge

This Tripp Lite P032-E06 extends a power connection by six feet using 14 gauge conductors. It carries 15 A at 250 V AC and is rated for 120 V AC and 230 V AC operation. The cord links equipment with a C13 inlet to a C20 outlet on a PDU or UPS. It suits servers, network switches, monitors and similar rack-mounted devices.

Thermals Noise and Power Draw

The passive cable assembly generates no audible noise and adds no active heat to the rack environment. Its 14 gauge copper conductors handle the rated 15 A load without exceeding temperature limits for the insulation. Voltage drop over the 1.8 metre length stays within normal limits for 120 V AC and 230 V AC circuits. No fan or cooling consideration is required.

Locking C13 to C20 Connectors

The C20 plug incorporates a P-Lock Lite mechanism that mates securely with P-Lock outlets on Eaton G4 and newer PDUs with C19 and C39 outlets. This locking action prevents accidental disconnection during rack maintenance or vibration. The six-foot length reduces excess slack in dense enclosures. The cord is not suitable for devices that require a non-locking C14 inlet or for applications above the 15 A rating.

Highlights

  • Secure P-Lock connection prevents accidental disconnects with compatible PDUs
  • 6 ft length reduces cable clutter in tight rack enclosures
  • 14 gauge conductors support 15 A at 250 V AC for reliable power delivery
  • IEC 60320 C13 to C20 connectors fit computers, servers and network gear
  • 8 m cord provides flexible placement between device and power source

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the locking C20 plug to a P-Lock outlet on my PDU, and what step is often missed?

Align the C20 connector with the P-Lock outlet, push firmly until the latch clicks, then verify the lock tab is fully engaged to prevent accidental disconnects.

What part of this cord will need inspection or replacement after long-term rack use?

Check the C13 and C20 connector housings and the 14-gauge cable jacket for cracking, discoloration or heat damage near the plugs.

At what sustained load does the 14-gauge conductor hit its rated limit on a 120 V circuit?

The cord is rated for 15 A at 120 V AC, so continuous draw above 15 A exceeds its specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.