We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black two-foot locking power cord with C13 and C20 connectors

Tripp Lite

Tripp Lite P032-E02 14 AWG C13-C20 locking power cord 2 ft

SKU CH-J68V-T90YY MPN P032-E02

Connects C13 devices to C20 PDU outlets with a locking P-Lock Lite connector using 14 AWG cable rated for 15 A at 250 V AC over a two foot length

  • Locking C13-to-C20 connector prevents accidental disconnects with P-Lock outlets
  • 14 AWG gauge supports 250 V AC / 15 A for reliable power delivery
  • Two-foot length reduces cable clutter in crowded rack enclosures
  • Compatible with computers, servers, monitors, PDUs and network devices
  • IEC 60320 C13 and C20 connectors fit standard equipment power ports

Locking C13-to-C20 Power Cord

The Tripp Lite P032-E02 is a two-foot locking power extension cord built for rack-mounted equipment. It connects servers, network switches, PDUs and UPS units using IEC 60320 C13 and C20 ends. The P-Lock Lite C20 plug mates securely with Eaton G4 and newer PDUs that have C19 or C39 outlets.

14 AWG Capacity for 15 A Loads

Fourteen-gauge conductors carry up to 15 A at 120 V AC, 230 V AC or 250 V AC, covering typical lower-amp data-centre and workstation circuits. The short 0.6-metre length keeps voltage drop negligible while eliminating slack that blocks airflow in dense racks. It is not suited for runs that need more reach or for circuits demanding heavier gauge wire.

Secure Locking and Tidy Routing

The locking C20 connector resists accidental disconnects caused by vibration or cable management pressure. A two-foot tail reduces clutter and simplifies cable tracing in crowded enclosures. The cord does not fit standard non-locking C20 inlets, so verify outlet compatibility before ordering.

Highlights

  • Locking C13-to-C20 connector prevents accidental disconnects with P-Lock outlets
  • 14 AWG gauge supports 250 V AC / 15 A for reliable power delivery
  • Two-foot length reduces cable clutter in crowded rack enclosures
  • Compatible with computers, servers, monitors, PDUs and network devices
  • IEC 60320 C13 and C20 connectors fit standard equipment power ports

Specifications

No published specifications for this item yet.

Questions about this item

Will the 2 ft 14 AWG C13-to-C20 cord reach from my existing rack-mounted PDU to a server two feet away?

Yes, the two-foot (0.6-meter) length is designed for short runs between a device and a PDU in a crowded rack, and the 14 AWG conductors are rated for 15 A at 250 V AC, 120 V AC or 230 V AC.

How can I confirm the P-Lock Lite C20 connector is properly locked to my Eaton G4 PDU's C19 outlet after installation?

Push the C20 plug fully into the P-Lock outlet until you feel a distinct click; the locking tab then prevents accidental disconnection, so a firm tug should not pull the cord free.

Does the package include the locking C13-to-C20 cord only, or are mounting brackets or extra adapters also supplied?

The box contains the single two-foot P032-E02 locking power extension cord with a P-Lock Lite C20 plug on one end and a standard C13 connector on the other; no brackets or adapters are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.