We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite P005-006-ARD 6 ft Power Extension Cord 14 AWG 15A 250V Red C14 to C13

SKU CH-XFFQ-8W6T1 MPN P005-006-ARD

Six-foot red C14-to-C13 extension cord with 14 AWG conductors rated 15 A at 250 V and UL-listed

  • TypeOthers
  • ColorRed
  • Length0.5 ft.
  • Connector Number2
  • Connector DetailIEC-320-C14 to IEC-320-C13
  • Terminal GenderMale to Female
  • Red SJT jacket and moulded ends simplify cable identification
  • Flexible 14 AWG construction eases routing in tight spaces
  • 250 V 15 A rating supports high-draw equipment
  • UL-listed certification confirms safety compliance
  • Six-foot length extends reach between C14 and C13 devices

Power Extension Cord

The Tripp Lite P005-006-ARD is a 6 ft heavy-duty power extension cord built for equipment using IEC-320-C13 and C14 connectors. It suits data-centre racks, server rooms and workstations where a standard cord falls short and a secure, colour-coded link is required.

15A 250V Rating Limits

The cord carries a 15A current at up to 250V through 14 AWG conductors, so it cannot serve loads that exceed this ampacity or voltage. The UL listing confirms compliance for the stated rating only; any device demanding higher current or a different connector standard falls outside its certified envelope.

Capacity and Headroom

The flexible SJT jacket and fully moulded ends handle routine rack reconfigurations and ambient temperatures from -20 to 60 °C. It comfortably powers typical servers, monitors and power supplies within the 15A limit, but runs out of headroom for high-density blade chassis or multi-kilowatt UPS feeds that require thicker gauge or higher-rated cables.

Highlights

  • Red SJT jacket and moulded ends simplify cable identification
  • Flexible 14 AWG construction eases routing in tight spaces
  • 250 V 15 A rating supports high-draw equipment
  • UL-listed certification confirms safety compliance
  • Six-foot length extends reach between C14 and C13 devices

Specifications

BrandTripp Lite
ModelP005-006-ARD
TypeOthers
ColorRed
Length0.5 ft.
Connector Number2
Connector DetailIEC-320-C14 to IEC-320-C13
Terminal GenderMale to Female
SpecificationsOperating Temp.: -20 to 60 degree C
Storage Temp.: -20 to 60 degree C
Operating Humidity: 10 - 85% RH
Storage Humidity: 10 - 85% RH
FeaturesEasy-to-identify red SJT jacket and fully molded blue ends
Flexible 14 AWG wire for easy routing
250V/15A rating
UL-listed
Also recommended for replacing lost or old power cord
Shipping weight0.30 kg
Package size251 × 178 × 13 mm

Questions about this item

Should I pick the 6 ft red cord or a different length for my rack?

The 6 ft length gives enough slack to route from a floor PDU to mid-rack equipment without excess cable that blocks airflow.

What does the 15A 250V rating mean when I plug this into my server?

It means the cord can safely carry up to 15 amps at 250 volts, so it will handle typical server power supplies drawing up to that limit.

How does the C14-to-C13 connection limit what I can plug in?

The male C14 plugs into a PDU or UPS outlet, while the female C13 accepts any device with a C14 inlet, capping the link at the cord's 15A rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.