Tripp Lite
Tripp Lite P005-003-ARD 3 ft power extension cord 14 AWG 15A C14 to C13 red
Three-foot red C14-to-C13 extension cord with 14 AWG wire rated 15 A at 250 V, UL-listed
- TypeOthers
- ColorRed
- Length0.5 ft.
- Connector Number2
- Connector DetailIEC-320-C14 to IEC-320-C13
- Terminal GenderMale to Female
- Red SJT jacket and moulded ends simplify identification
- Flexible 14 AWG wire eases routing in tight spaces
- 15 A 250 V rating supports demanding equipment
- UL-listed construction meets recognised safety standards
- 3 ft length connects C13 and C14 devices without excess slack
3 ft C14-to-C13 power extension
This red 3 ft extension cord carries a C14 male plug on one end and a C13 female connector on the other, letting you bridge the gap between a device and a PDU or UPS outlet. It is built for servers, workstations, network gear and monitors that use the IEC-320-C13/C14 interface. The 14 AWG conductors are rated for 15 A at 250 V, matching standard rack power distribution. Buyers who need a longer reach or a different connector gender will need another cable.
Thermals noise and power draw
The cord operates reliably from -20 to 60 °C in both operating and storage conditions, with humidity tolerance of 10 to 85 % RH. As a passive copper assembly it generates no audible noise and adds no active power draw beyond the negligible resistance of the 14 AWG wires. The SJT jacket and fully moulded ends protect the conductors from physical stress in dense rack environments. Installers who require plenum-rated or armoured cable should look elsewhere.
Red jacket and moulded ends
The bright red SJT jacket and matching moulded connectors make the cable easy to trace in a crowded cabinet, reducing the chance of accidental disconnects. Flexible 14 AWG stranding allows tight routing around rack rails and cable managers without kinking. UL listing confirms compliance with North American safety standards for the 250 V, 15 A rating. Users who prefer a different colour code or a locking C13 connector will need a separate solution.
Highlights
- Red SJT jacket and moulded ends simplify identification
- Flexible 14 AWG wire eases routing in tight spaces
- 15 A 250 V rating supports demanding equipment
- UL-listed construction meets recognised safety standards
- 3 ft length connects C13 and C14 devices without excess slack
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | P005-003-ARD |
| Type | Others |
| Color | Red |
| Length | 0.5 ft. |
| Connector Number | 2 |
| Connector Detail | IEC-320-C14 to IEC-320-C13 |
| Terminal Gender | Male to Female |
| Specifications | Operating Temp.: -20 to 60 degree C Storage Temp.: -20 to 60 degree C Operating Humidity: 10 - 85% RH Storage Humidity: 10 - 85% RH |
| Features | Easy-to-identify red SJT jacket and fully molded blue ends Flexible 14 AWG wire for easy routing 250V/15A rating UL-listed Also recommended for replacing lost or old power cord |
| Shipping weight | 0.20 kg |
| Package size | 251 × 178 × 13 mm |
Questions about this item
How do I connect the C14 male plug and C13 female socket correctly?
Insert the C14 male plug into the device's C13 inlet and the C13 female socket onto the power source's C14 outlet; the fully moulded ends key both connections so they only seat one way.
When should the 14 AWG SJT jacketed cable be replaced?
Replace the cord if the red SJT jacket shows cuts, abrasion or heat discoloration, or if the moulded C13/C14 ends become loose or cracked.
What is the continuous current limit for the 14 AWG conductors?
The cord is rated for 15 A at 250 V; sustained loads above 15 A will exceed the conductor rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



