Tripp Lite
Tripp Lite P004-18N-2C13 power splitter cord C14 male to 2x C13 female 18 in
Splits one C13 outlet into two C14 inlets for powering dual devices from a single PDU or UPS connection
- TypePower
- ColorBlack
- Length18 in.
- Connector Number3
- Connector DetailC14 Male to 2 x C13 Female
- Terminal GenderMale to Female
- Connects two devices to one AC outlet to save space
- 18-inch C14-to-C13 splitter fits tight PDU or UPS installations
- 10 A, 100–250 V rating supports a wide range of equipment
- Replaces worn or missing C13-to-C14 PDU-style cords
- Black 18 AWG cable with three connectors for reliable power distribution
Product Purpose
The Tripp Lite P004-18N-2C13 is an 18 in power splitter cord with a C14 male plug and two C13 female connectors. It lets two devices with C14 inlets draw power from a single C13 outlet on a PDU or UPS. The cord is rated for 10 A at 100–250 VAC and uses 18 AWG conductors. It suits server racks or workstations where outlet space is limited.
Splitter Function
The Y-cable replaces two separate cords, reducing clutter and saving one outlet on the power strip. Each C13 branch feeds a device such as a server, monitor or network switch that has a C14 inlet. The combined load must stay within the 10 A maximum. The short 1.5 ft length keeps the wiring tidy inside a cabinet.
Setup Checklist
Verify that your PDU or UPS provides a C13 outlet and that each target device has a C14 inlet. Confirm the total current draw of both devices does not exceed 10 A. Ensure the 18 in reach is sufficient for your rack layout; longer runs need a different cable. The cord is for indoor use only.
Highlights
- Connects two devices to one AC outlet to save space
- 18-inch C14-to-C13 splitter fits tight PDU or UPS installations
- 10 A, 100–250 V rating supports a wide range of equipment
- Replaces worn or missing C13-to-C14 PDU-style cords
- Black 18 AWG cable with three connectors for reliable power distribution
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | P004-18N-2C13 |
| Type | Power |
| Color | Black |
| Length | 18 in. |
| Connector Number | 3 |
| Connector Detail | C14 Male to 2 x C13 Female |
| Terminal Gender | Male to Female |
| Specifications | Maximum Input Amps: 10 Cable Length (ft.): 1.5 Cable Length (in.): 18 Voltage Compatibility (VAC): 100-250 |
| Features | C14-to-C13 splitter allows 2 devices with C14 inlets to share one AC power input cord and one C13 outlet on a PDU or UPS system. Connects 2 devices to one AC outlet to save space and reduce cable clutter Recommended for powering multiple computers, monitors or other compatible peripherals C14 end connects to PDU or UPS power; C13 ends connect to devices’ C14 inlets C13-to-C14 PDU-style extension cord is ideal replacement for worn-out or missing cable |
| Shipping weight | 0.23 kg |
| Package size | 254 × 178 × 13 mm |
Questions about this item
Will the 18 AWG cable or C13 connectors need periodic replacement?
The 18 AWG cord and moulded C13 connectors are rated for continuous 10 A service; no scheduled replacement is required unless physical damage or overheating is observed.
What is the first limit reached when both outlets draw maximum current continuously?
The splitter is rated for 10 A total input; exceeding 10 A combined load will trip the upstream PDU or UPS breaker first.
Does the cord generate noticeable heat or noise when powering two devices all day?
The passive 18 AWG cable produces no noise and only minimal warmth at or below its 10 A, 100–250 V rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115106BTC
In stock
