Tripp Lite
Tripp Lite P004-003-ARD 3 ft 18 AWG 10A C14 to C13 power extension cord
Red 3 ft C14 to C13 extension cord with 18 AWG wire, 10 A rating and UL listing
- TypeOthers
- ColorRed
- Length3 ft.
- Connector Number2
- Connector DetailIEC-320-C14 to IEC-320-C13
- Terminal GenderMale to Female
- 3 ft length extends reach between C14 and C13 devices
- Red SJT jacket and moulded ends simplify cable identification
- Flexible 18 AWG wire eases routing in tight spaces
- Rated 10 A at 250 V for standard equipment power
- UL listed for verified safety compliance
Purpose & audience
This three-foot IEC power extension cord carries 10 amps at up to 250 volts and is built for devices that use C13 and C14 connectors such as desktop PCs, monitors, printers and rack-mounted power supplies. It suits installers who need a short, colour-coded link between a PDU or UPS outlet and nearby equipment. It is not for builders who need a longer reach or a different connector type.
Build integration
The male C14 plug inserts into any standard C13 receptacle while the female C13 end accepts the device cord, so no adapters or tools are required. Flexible 18 AWG conductors and a red SJT jacket make routing through tight cable trays or behind racks straightforward. The moulded ends stay secure during vibration but cannot be field-terminated or repaired if damaged.
Thermals, noise & power
With no active components the cord produces no audible noise and adds negligible heat under normal 10 A loads. Insulation is rated for continuous operation between minus 20 and 60 degrees Celsius at up to 85 percent relative humidity. UL listing confirms the materials meet recognised safety standards for the stated voltage and current range.
Highlights
- 3 ft length extends reach between C14 and C13 devices
- Red SJT jacket and moulded ends simplify cable identification
- Flexible 18 AWG wire eases routing in tight spaces
- Rated 10 A at 250 V for standard equipment power
- UL listed for verified safety compliance
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | P004-003-ARD |
| Type | Others |
| Color | Red |
| Length | 3 ft. |
| Connector Number | 2 |
| Connector Detail | IEC-320-C14 to IEC-320-C13 |
| Terminal Gender | Male to Female |
| Specifications | Operating Temp.: -20 to 60 degree C Storage Temp.: -20 to 60 degree C Operating Humidity: 10 - 85% RH Storage Humidity: 10 - 85% RH |
| Wire Gauge | 18 AWG |
| Features | Easy-to-identify red SJT jacket and fully molded blue ends Flexible 18 AWG wire for easy routing 250V/10A rating UL-listed Also recommended for replacing lost or old power cord |
| Shipping weight | 0.14 kg |
| Package size | 251 × 178 × 13 mm |
Questions about this item
How much current can the 18 AWG conductors carry continuously before heat becomes the limiting factor?
The cord is rated for 10 A at up to 250 V, so sustained loads above 10 A will exceed the wire’s safe capacity.
Does the red SJT jacket or the molded ends get noticeably warm during all-day operation at full load?
At the rated 10 A the conductors run within UL limits; the jacket and ends stay warm but not hot enough to degrade the -20 to 60 °C operating range.
Which devices must already have IEC-320-C14 inlets and C13 outlets for this cable to connect them?
Any equipment using standard C14 power inlets — such as servers, UPS units, PDUs or monitors — will accept the C13 plug on this cord.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114917BTC
In stock
