Tripp Lite
Tripp Lite NPOE-30W-1G Gigabit PoE+ Injector 30W 1-Port power adapter
Delivers 30 W of power and Gigabit data up to 328 ft over existing Cat5e/6/6a cabling to a single PoE or PoE+ device
- Changer TypeGigabit PoE+ Midspan Active Injector
- ColorBlack
- SpecificationsPoE+ injector uses existing Cat5e/6/6a cable to supply power
- FeaturesAdds PoE Devices to Your LAN Without a PoE Switch Now you ca
- Package ContentsNPOE-30W-1G Gigabit PoE+ Midspan Active Injector - IEEE 802.
- Delivers 30W power plus data over existing Cat5e/6/6a cable up to 328 ft
- Extends power and data to any PoE or PoE+ device where no AC outlet exists
- Supports Gigabit Ethernet speeds up to 1000 Mbps for fast network performance
- Plug-and-play installation requires no configuration for immediate use
- Compact hand-sized housing mounts on any smooth surface for flexible placement
PoE+ power for non-PoE networks
The Tripp Lite NPOE-30W-1G is a Gigabit PoE+ midspan injector that adds 30W of power to a single Ethernet link. It lets you connect a PoE or PoE+ device such as a camera, wireless access point or VoIP phone to a standard non-PoE switch using existing Cat5e, Cat6 or Cat6a cabling. The unit complies with IEEE 802.3at and 802.3af and delivers both power and data up to 328 ft. A detachable 6 ft C13 to NEMA 5-15P power cord is included for immediate plug-and-play operation.
Installers needing one powered port.
This injector suits installers who need to power a single PoE device where no AC outlet exists near the device location. It is not for buyers who need to power multiple devices simultaneously or who require a managed PoE switch with per-port control and monitoring. Networks that already have PoE switching infrastructure will not benefit from adding this midspan unit.
30W total power budget per port
The injector supplies a maximum of 30W to the connected device, which is the defining limit for compatibility. Devices that draw more than 30W cannot be powered by this unit, regardless of cable length or switch capacity. Verify the power requirement of your PoE device against this 30W figure before purchase.
Highlights
- Delivers 30W power plus data over existing Cat5e/6/6a cable up to 328 ft
- Extends power and data to any PoE or PoE+ device where no AC outlet exists
- Supports Gigabit Ethernet speeds up to 1000 Mbps for fast network performance
- Plug-and-play installation requires no configuration for immediate use
- Compact hand-sized housing mounts on any smooth surface for flexible placement
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | NPOE-30W-1G |
| Changer Type | Gigabit PoE+ Midspan Active Injector |
| Color | Black |
| Specifications | PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch. Saves money by delivering 30W of power + data up to 328 ft. through existing cabling Extends power + data to any PoE or PoE+ device installed where no AC outlet is available Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps Quick and easy plug-and-play installation with no configuration necessary Compact, hand-sized plastic housing ready for mounting on any smooth surface Side A - Connector 1: RJ45 (FEMALE) Side B - Connector 1: RJ45 (FEMALE) Network Switch Ports: |
| Features | Adds PoE Devices to Your LAN Without a PoE Switch Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. Saves You Time and Money on Unnecessary Equipment Updates This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts |
| Package Contents | NPOE-30W-1G Gigabit PoE+ Midspan Active Injector - IEEE 802.3at, 30W, 1 Port Detachable C13 to NEMA 5-15P power cord, 6 ft. Owner’s manual |
| Shipping weight | 0.52 kg |
| Package size | 234 × 119 × 94 mm |
Questions about this item
What IEEE standard does the NPOE-30W-1G injector support and what power limit does it enforce?
The injector complies with IEEE 802.3at and 802.3af, delivering up to 30W of power to a connected PoE+ device.
What mounting options does the compact plastic housing provide for the NPOE-30W-1G?
The hand-sized housing is ready for mounting on any smooth surface, allowing placement on a desk, shelf or wall without a rack.
How is the NPOE-30W-1G installed and what step do users often miss?
Connect the injector between a non-PoE switch and the PoE device using Cat5e/6/6a cable, then plug the detachable C13 to NEMA 5-15P power cord into an AC outlet; the step often missed is ensuring the power cord is fully seated before powering on.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115692BTC
In stock
