Tripp Lite
Tripp Lite N821-03M-MG-T 3M 10Gb Duplex Multimode OM4 LC/LC LSZH fibre optic cable
A 3-metre duplex multimode OM4 fibre patch cable with LC connectors and LSZH jacket, supporting 10, 40 and 100 Gbps links up to 400 metres
- TypeFiber
- ColorMagenta
- Length10 ft.
- Connector Number2
- Connector DetailLC DUPLEX (MALE) WITH PULL/PUSH TAB to LC DUPLEX (MALE) WITH
- Speed10Gbps / 40Gbps / 100Gbps
- Supports 10 Gb serial links up to 400 m
- Nearly four times bandwidth of 62.5 µm multimode fibre
- Push-pull tabs enable one-hand install and removal
- Slim uniboot design keeps cable routing tidy
- Magenta jacket gives instant OM4 visual identification
3-metre OM4 duplex patch cable
The Tripp Lite N821-03M-MG-T is a 3-metre multimode fibre patch cable built for 10, 40 and 100 Gbps links. It uses 50/125 µm OM4 glass with LC duplex connectors on both ends. The magenta jacket allows quick visual identification in dense panels. It suits LAN, SAN and data-centre interconnects where short-reach high-speed runs are required.
Replaces legacy 62.5 µm multimode runs
This cable delivers nearly four times the bandwidth of conventional 62.5 µm multimode fibre. The upgrade is worth it when existing links cannot support 10 Gb serial transmission up to 400 metres at 850 nm. It works with VCSEL and LED light sources commonly deployed in modern head-ends and central offices. Installers gain headroom for current and near-future speeds without re-cabling.
Sustained load behaviour
The LSZH jacket and ceramic ferrules maintain signal integrity across the rated operating range of -20 to 60 °C. Push-pull tabs allow one-hand changes without disturbing adjacent fibres during maintenance windows. The slim uniboot design keeps airflow paths clear in packed cabinets, reducing thermal stress on active equipment over long periods.
Highlights
- Supports 10 Gb serial links up to 400 m
- Nearly four times bandwidth of 62.5 µm multimode fibre
- Push-pull tabs enable one-hand install and removal
- Slim uniboot design keeps cable routing tidy
- Magenta jacket gives instant OM4 visual identification
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | N821-03M-MG-T |
| Type | Fiber |
| Color | Magenta |
| Length | 10 ft. |
| Connector Number | 2 |
| Connector Detail | LC DUPLEX (MALE) WITH PULL/PUSH TAB to LC DUPLEX (MALE) WITH PULL/PUSH TAB |
| Speed | 10Gbps / 40Gbps / 100Gbps |
| Specifications | Operating Temperature Range: -4 to 140 degree F (-20 to 60 degree C) Storage Temperature Range: -4 to 140 degree F (-20 to 60 degree C) Package Includes: N821-03M-MG-T 10 Gb Duplex Multimode 50/125 OM4 LSZH Fiber Patch Cable, 3 m (10 ft.) |
| Features | Nearly 4x the bandwidth over conventional 62.5 µm multimode fiber Push/pull tab connectors install/remove with one hand Slim, space-saving uniboot design for neat cable management Premium-grade ceramic ferrules designed for fast applications Magenta color for easy OM4 identification |
| Shipping weight | 0.02 kg |
| Package size | 229 × 178 × 13 mm |
Questions about this item
Will the 10 ft duplex cable with LC connectors fit a standard 125 µm patch panel port?
Yes, the 50/125 µm multimode fiber uses standard LC duplex connectors that match any panel port built for 125 µm ferrules.
How do I seat the push/pull tab LC connectors without damaging the ceramic ferrules?
Squeeze the tab with one hand to release the latch, then insert straight until you feel a click; never twist or rock the connector.
When should I replace this OM4 patch cable in a 10 Gb link?
Replace if insertion loss exceeds your link budget, if the magenta jacket shows cracks from exceeding the -20 to 60 °C range, or if ferrules are scratched after repeated mating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



