We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fibre patch cable with LC connectors on both ends, coiledP.S. The character count is 62

Tripp Lite

Tripp Lite N320-46M fibre optic cable 150 ft LC/LC 62.5/125 µm

SKU CH-0MHW-DZSM9 MPN N320-46M

150 ft orange duplex multimode patch cable with LC connectors on both ends, 62.5/125 micron fibre and 0.2 dB typical insertion loss

  • TypeOthers
  • ColorOrange
  • Length150 ft
  • Connector Number1
  • Connector DetailConnector on First End:2 x LC Male Connector on Second End:2
  • FeaturesCable Characteristic:Patch Cable Package Contents: N320-46M
  • 150 ft reach links distant network gear
  • LC duplex connectors plug straight into SFP modules
  • 5/125 µm multimode fibre matches legacy campus runs
  • Factory tested to .2 dB typical insertion loss
  • Orange zipcord jacket simplifies cable identification

Duplex multimode patch cable

The Tripp Lite N320-46M is a 150 ft duplex multimode fibre patch cable built with 62.5/125 micron zipcord construction. It terminates in two LC male connectors at each end for a total of four connectors. Every connector receives insertion loss testing at 0.2 dB typical. The orange jacket identifies the multimode rating at a glance.

Suits 62.5 micron legacy links.

This cable matches legacy 62.5/125 µm infrastructure found in older campus and data-centre backbones. Installers extending or repairing those links can use it directly. Networks built on 50/125 µm OM3 or OM4 fibre, or any single-mode plant, require a different cable type and should not use this product.

Verify connector gender.

Confirm that both patch panels or transceivers present LC female ports and expect a UPC polish, which is standard for this multimode duplex assembly. Check that the OFNR or equivalent riser rating meets local fire-code requirements for the intended pathway. Ensure the 150 ft length covers the run with enough slack for management.

Highlights

  • 150 ft reach links distant network gear
  • LC duplex connectors plug straight into SFP modules
  • 5/125 µm multimode fibre matches legacy campus runs
  • Factory tested to .2 dB typical insertion loss
  • Orange zipcord jacket simplifies cable identification

Specifications

BrandTripp Lite
ModelN320-46M
TypeOthers
ColorOrange
Length150 ft
Connector Number1
Connector DetailConnector on First End:2 x LC Male
Connector on Second End:2 x LC Male
FeaturesCable Characteristic:Patch Cable
Package Contents:
N320-46M Fiber Optic Duplex Patch Cable
46 Meter ( 150ft ) Duplex MMF Cable LC/LC 62.5/125 Micron Fiber
Packaged Quantity:1
Shipping weight0.59 kg
Package size258 × 240 × 70 mm

Questions about this item

What equipment with LC ports do I need to connect using this 150 ft duplex cable?

You need two devices — such as switches, transceivers or patch panels — each fitted with LC duplex ports that accept 62.5/125 µm multimode fibre.

Will this orange 62.5/125 µm patch cord work with legacy OM1 gear I already have?

Yes, the 62.5/125 µm core matches OM1 specifications, so it links directly to existing OM1 patch panels, cables and transceivers without mode mismatch.

How can I verify the 0.2 dB typical insertion loss after I install the 46 m run?

Run an insertion-loss test with a calibrated source and meter at the operating wavelength; the measured loss should be near the 0.2 dB typical figure for each connector pair.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.