We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular metal module with LC duplex port and gold edge connector

Tripp Lite

Tripp Lite N28601GLCLHSMD SFP Transceiver 10 km 1.25 Gbps

SKU CH-6AGM-TZM5F

Connects singlemode fiber to Cisco switches up to 10 km at 1.25 Gbps with hot-swappable LC duplex

  • Device TypeTransceiver
  • Connects singlemode fiber to Cisco switches and servers
  • Transmits data up to 10 km at 1.25 Gbps
  • Hot-swappable installation avoids network shutdown
  • Metal housing protects against EMI and power dissipation
  • MSA-compliant equivalent to Cisco GLC-LH-SMD module

Tripp Lite SFP Transceiver 10 km

The Tripp Lite N28601GLCLHSMD is an SFP transceiver built for Cisco network switches and servers. It connects an 8.3/125 singlemode fiber cable to a 10/100/1000 Mbps port and transmits data up to 10 kilometers at 1.25 Gbps. The metal housing shields against electromagnetic interference.

Who This Suits and Who Should Look Elsewhere

This module suits administrators extending a Gigabit Ethernet link over singlemode fiber to 10 km using an LC duplex connector. It is not for networks that require multimode fiber, shorter reach optics, or speeds beyond 1.25 Gbps. Buyers needing a different wavelength or connector type must select another transceiver.

Deciding Specification: 10 km Reach at 1.25 Gbps

The 10 kilometer reach at 1.25 Gbps over 8.3/125 singlemode fiber is the specification that determines compatibility. Confirm your switch port supports this distance and data rate before purchase. The hot-swappable design allows installation without a network shutdown.

Highlights

  • Connects singlemode fiber to Cisco switches and servers
  • Transmits data up to 10 km at 1.25 Gbps
  • Hot-swappable installation avoids network shutdown
  • Metal housing protects against EMI and power dissipation
  • MSA-compliant equivalent to Cisco GLC-LH-SMD module

Specifications

BrandTripp Lite
Device TypeTransceiver

Questions about this item

How do I install the SFP transceiver into my Cisco switch without causing a network shutdown?

Insert the SFP end directly into an available SFP slot on the Cisco device; the module is fully hot-swappable, so no reboot or network interruption is required. Connect an LC duplex singlemode fiber cable to the LC connector on the other end.

What maintenance or replacement will the LC duplex connector or fiber cable need over time?

The LC duplex connector may require periodic cleaning with a fiber optic cleaning tool to remove dust or contaminants that can degrade signal quality; the singlemode fiber cable itself is passive and typically lasts decades unless physically damaged.

What distance or speed limit will I hit first when running this transceiver continuously at 1.25 Gbps?

The transceiver is rated for a maximum reach of 10 kilometers (6.2 miles) over 8.3/125 singlemode fiber at 1.25 Gbps; the distance limit is the primary constraint under sustained use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.