Tripp Lite
Tripp Lite EVMI4609X PDU 42-Outlet Metered 24xC13 18xC39 230V 60A 10ft 0U
Metered 0U PDU delivers 17.3 kVA at 208 V through 24 C13 and 18 C39 outlets from a 230 V 60 A input with a 10 ft cord
- TypePDUs & Line Conditioners
- Rack Size0U
- Input Voltage230V
- Maximum Input Current60A
- Output Voltage208V
- Output Watts (VA)17.30 kVA
- Metered monitoring tracks 17.3 kVA load in real time
- 42 outlets (24 C13, 18 C39) serve dense rack deployments
- 60 A 230 V input with 10 ft cord powers high-capacity circuits
- 0U vertical design fits 72-inch height without consuming rack units
- Embedded hot-swappable network module enables secure remote management
Enterprise Rack Power Distribution
The EVMI4609X is a 0U vertical metered PDU designed for 42U enterprise and colocation racks. It accepts a 230V 60A feed through a 460P9W input and delivers 208V output across 42 outlets. The unit targets data-centre operators who need dense, monitored power delivery in a single vertical chassis.
Metered Monitoring and Secure Management
A built-in gigabit network module provides real-time metering, trend charts and severity-prioritised alerts over Ethernet. Chain-of-trust encryption and secure firmware boot protect the PDU from becoming a network vulnerability point. Hot-swappable management allows service without interrupting connected loads, while optional environmental sensors add temperature and humidity visibility.
High-Density Outlet Layout
Twenty-four IEC 60320 C13 and eighteen IEC 60320 C39 receptacles support a mix of standard servers and high-current equipment from one 17.3 kVA source. The 72-inch height fits full-height racks without consuming horizontal U-space, and toolless mounting simplifies installation. The 10-foot input cord reaches overhead or under-floor power feeds without excess slack.
Highlights
- Metered monitoring tracks 17.3 kVA load in real time
- 42 outlets (24 C13, 18 C39) serve dense rack deployments
- 60 A 230 V input with 10 ft cord powers high-capacity circuits
- 0U vertical design fits 72-inch height without consuming rack units
- Embedded hot-swappable network module enables secure remote management
Specifications
| Brand | Eaton |
|---|---|
| Model | EVMI4609X |
| Part Number | EVMI4609X |
| Type | PDUs & Line Conditioners |
| Rack Size | 0U |
| Input Voltage | 230V |
| Maximum Input Current | 60A |
| Output Voltage | 208V |
| Output Watts (VA) | 17.30 kVA |
| Output Connector(s) | 24 x IEC 60320 C13 18 x IEC 60320 C39 |
| Dimensions | Height: 72" Width: 2.6" Depth: 2.1" |
| Weight | 25.35 lb |
| Shipping weight | 12.70 kg |
| Package size | 2007 × 232 × 135 mm |
Questions about this item
How is the 0U vertical PDU mounted in a 42U rack, and which step do installers often miss?
The unit fits a 72-inch height and mounts vertically using the toolless brackets; the step often missed is securing both top and bottom brackets to prevent sag under the 25.35 lb weight.
Which component will need replacement first during the PDU's service life?
The hot-swappable gigabit network module (GNM) is the only field-replaceable part and can be swapped without powering down the 42 outlets.
At what sustained load does the 60 A input circuit breaker become the limiting factor?
The 60 A breaker trips when total draw exceeds 17.3 kVA at 208 V output, which is the unit's rated capacity across all 24 C13 and 18 C39 outlets.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011497BTC
In stock
