We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite DWT3770X Tilt TV Mount 37-70" 200 lbs

SKU CH-SHMX-64Y4M MPN DWT3770X

Tilt wall mount holds flat-panel displays from 37 to 70 inches up to 200 lbs with VESA patterns up to 800x400 mm and -10° tilt adjustment

  • NameTilt Wall Mount for Flat-Screen Displays
  • Mount StyleTilting Low-Profile
  • ColorBlack
  • MovableDegrees of Motion: -10/+0
  • TV Size Capacity37" - 70"
  • TV Weight CapacityMax. load 200 lbs.
  • Tilts up to 10° downward for glare reduction
  • Supports screens from 37" to 70" diagonally
  • Holds displays weighing up to 200 lbs
  • Fits VESA patterns including 100x100 through 800x400 mm
  • Low-profile design keeps the mount close to the wall

Tilt Mount for 37-70 Inch Displays

This tilting wall mount fits flat-panel screens from 37 to 70 inches and supports up to 200 lbs. The low-profile design keeps the display close to the wall for a clean installation. It is built for home theatres and commercial spaces needing a secure fixed-angle solution. The black finish blends with most screen bezels and room decor.

Capacity and VESA Range

The bracket handles VESA patterns from 100x100 up to 800x400 mm, covering most screens in the size class. Maximum load is 200 lbs, so heavier displays near the 70-inch limit are within spec. Tilt range is limited to 10 degrees downward with no upward movement. Buyers needing full motion, swivel or upward tilt should look at articulating arms instead.

Fixed 10 Degree Downward Tilt

The only angle adjustment is -10 degrees to +0 degrees, letting you aim the screen down from a high mounting position. There is no side-to-side swivel or level adjustment after installation. Verify your seating height and wall location before purchase because the angle cannot be changed laterally. The open frame allows cable access behind the screen.

Highlights

  • Tilts up to 10° downward for glare reduction
  • Supports screens from 37" to 70" diagonally
  • Holds displays weighing up to 200 lbs
  • Fits VESA patterns including 100x100 through 800x400 mm
  • Low-profile design keeps the mount close to the wall

Specifications

BrandTRIPP LITE
ModelDWT3770X
NameTilt Wall Mount for Flat-Screen Displays
Mount StyleTilting Low-Profile
ColorBlack
MovableDegrees of Motion: -10/+0
TV Size Capacity37" - 70"
TV Weight CapacityMax. load 200 lbs.
VESA CompatibleVESA Pattern (mm) 100x100; 200x100; 200x200; 400x200; 400x400; 600x400; 800x400
FeatureLow-profile mounting keeps unit out of sight for sleek, professional appearance
Fits most flat-panel displays from 37" to 70"
Open frame for easy wall access
Tilt adjustment improves viewing angles in applications where the audience is below the display
Horizontal adjustment compensates for off-center wall studs
Wide range of motion with -10° to 0° tilt capability
Equipped with a bubble level for accurate display leveling
Supports up to 200 lbs
Weight6.95
Shipping weight3.63 kg
Package size884 × 216 × 66 mm

Questions about this item

Will the 800x400 VESA pattern on my existing display fit this mount?

The mount supports VESA patterns up to 800x400 mm so your display will attach directly.

How do I confirm the -10 degree tilt is engaged after installation?

Adjust the tilt mechanism until the display angles downward; the mount locks at the chosen position within the -10 to 0 degree range.

Does the package include lag bolts for securing the mount to wooden studs?

The supplied hardware kit contains lag bolts and anchors for wood-stud installation; concrete anchors are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.