We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tripp Lite B161-101 HDMI over IP encoder and decoder kit, two small black boxes with HDMI and RJ45 ports

Tripp Lite

Tripp Lite B161-101 HDMI over IP Repeater Kit 393 ft 4K 30 Hz

SKU CH-MSH2-45RF8 MPN B161-101

Transmits 4K 30 Hz HDMI up to 393 ft over IP with KVM and dual outputs

  • Visually lossless 4K video up to 393 ft point-to-point or via Gigabit Ethernet switch
  • Low-latency 4K at 30 Hz with 3.4 Gbps per channel and 12-bit colour depth
  • Scalable TCP/IP architecture allows point-to-multipoint distribution across standard network infrastructure
  • Built-in KVM support via three USB ports for remote keyboard, mouse and peripheral control
  • Dual HDMI outputs on decoder enable simultaneous display on two screens from one source

Digital Signage Extender Kit

The Tripp Lite B161-101 is an HDMI over IP encoder and decoder kit designed to extend visually lossless 4K signals up to 393.70 feet (120 meters) over standard Gigabit Ethernet. It supports 4K resolution at 30 Hz with 12-bit per channel color depth and 3D video capability. The kit includes one transmitter with an HDMI input and two receivers each providing an HDMI output, plus three USB ports and two RJ-45 network ports for KVM and control functions.

Installers Building Multi-Display Networks

This kit suits installers deploying large-scale digital signage in venues such as airports, campuses, shopping centres and conference centres where multiple 4K displays must be driven from a single source over existing network infrastructure. It is not suited for applications requiring 4K at higher refresh rates, nor for point-to-point runs exceeding the stated 393.70 ft range without intermediate switches. Users needing uncompressed zero-latency transport or fibre-optic cabling should consider alternative solutions.

4K at 30 Hz Over Copper Ethernet

The decisive specification is the 4K 30 Hz video extension over Cat5e/6 cabling up to 393.70 ft with 3.4 Gbps per channel bandwidth, which determines whether the kit matches the resolution, refresh and distance requirements of the installation.

Highlights

  • Visually lossless 4K video up to 393 ft point-to-point or via Gigabit Ethernet switch
  • Low-latency 4K at 30 Hz with 3.4 Gbps per channel and 12-bit colour depth
  • Scalable TCP/IP architecture allows point-to-multipoint distribution across standard network infrastructure
  • Built-in KVM support via three USB ports for remote keyboard, mouse and peripheral control
  • Dual HDMI outputs on decoder enable simultaneous display on two screens from one source

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 4K 30 Hz signal is reaching both HDMI outputs after connecting the kit?

Verify the displays show the expected 4K resolution at 30 Hz and check the encoder and decoder status LEDs for active link indication.

What cables and accessories are included with the B161-101 kit and what must I supply?

The kit includes the encoder and decoder units; you must provide Cat5e or Cat6 patch cables for the two RJ-45 ports and HDMI cables for the one input and two outputs.

Which version of the kit should I choose for a 393 ft point-to-point run with KVM control?

The B161-101 is the single kit supporting 4K at 30 Hz up to 393.70 ft with three USB ports for keyboard and mouse extension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.