We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular extender remote unit with DVI and RJ45 ports

Tripp Lite

Tripp Lite B140-1A0 DVI Over Cat5 Active Extender Remote Unit Black

SKU CH-EGFA-Q3KZ1 MPN B140-1A0

Extends a DVI-D single-link signal up to 200 ft at 1024 x 768 or 100 ft at 1600 x 1200 over Cat6 cable

  • TypeExtender Remote Unit
  • ColorBlack
  • Weight1.1
  • FeaturesRemote extender unit for the B140-002 (2-Port) and B140-004
  • Extends DVI-D single-link video up to 200 ft over Cat6 cable
  • Supports 1600 x 1200 resolution at 100 ft for sharp detail
  • Works with B140-002 and B140-004 local units for flexible deployment
  • Compact 1 x 2.50 x 3.60 inch receiver fits tight spaces
  • Includes external 5V 2A power supply and mounting hardware

Active DVI Remote Extender

The Tripp Lite B140-1A0 receives a DVI-D single-link signal over Cat5 or Cat6 cable from compatible local splitter units. It is designed for installers who need to place a display up to two hundred feet from a B140-002 or B140-004 source unit in commercial or home-theatre environments.

Distance and Resolution Limits

At 1024 x 768 the extender maintains a clean picture to the full two hundred foot maximum. Higher resolutions such as 1600 x 1200 are reliable only to one hundred feet, while 1920 x 1080 is supported within the same cable run constraints. Signal quality degrades beyond these stated distances.

Replaces Direct Cable Runs

This unit replaces a long native DVI cable when routing through walls or ceilings makes thick copper impractical. The jump is worth it when the display must sit farther than standard cable lengths allow and a local B140-series transmitter is already deployed. It does not suit point-to-point connections without the matching local unit.

Highlights

  • Extends DVI-D single-link video up to 200 ft over Cat6 cable
  • Supports 1600 x 1200 resolution at 100 ft for sharp detail
  • Works with B140-002 and B140-004 local units for flexible deployment
  • Compact 1 x 2.50 x 3.60 inch receiver fits tight spaces
  • Includes external 5V 2A power supply and mounting hardware

Specifications

BrandTripp Lite
ModelB140-1A0
TypeExtender Remote Unit
ColorBlack
Weight1.1
FeaturesRemote extender unit for the B140-002 (2-Port) and B140-004 (4-Port) Extender/Splitter local units
Extends a DVI-D single-link signal up to 200 ft. at 1024 x 768 (60Hz); or, up to 100 ft. at 1600 x 1200 (60Hz)
Plug and play; No drivers required
Compatible with all operating systems
Mounting hardware is included that allows the unit to be rackmounted, wallmounted or pole mounted
Shipping weight0.91 kg
Package size305 × 229 × 102 mm

Questions about this item

Will this remote unit work with my existing B140-002 or B140-004 local extender?

Yes, this remote unit is designed specifically for use with the B140-002 2-Port and B140-004 4-Port local extender/splitter units.

How do I verify the extender is delivering a proper 1920 x 1080 signal at 60Hz after installation?

The remote unit includes an equalization adjustment screw; use the supplied screwdriver to fine-tune the signal until the display shows a stable 1920 x 1080 image at 60Hz.

Does the package include the Category 6 cable and the local transmitter unit, or must I buy them separately?

The box contains the remote unit, mounting hardware, an adjustment screwdriver, a 5V 2A external power supply, and the owner's manual; the local unit and Cat6 cable are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.