We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight USB server interface units with HD15 and USB connectors

Tripp Lite

Tripp Lite B078-101-USB-8 KVM Switch 8-Pack Server Interface Units

SKU CH-CTB7-GJFRF MPN B078-101-USB-8

Eight USB server interface units connect servers to B070 or B072-series KVM switches over Cat5e cable

  • TypeUSB
  • FeaturesCONNECTIONS: Connector A: RJ45 (FEMALE) Connector B: HD15 (M
  • Weight20
  • Package Contents(x8) B078-101-USB-1 USB Server Interface Units (SIU)
  • Connect up to eight USB servers with one 8-pack of interface units
  • Link each server to B070 or B072 NetCommander switches via Cat5e cable
  • Install quickly with no software or drivers required
  • Each unit provides HD15 video and USB-A connections for server side
  • Package includes eight B078-101-USB-1 units for multi-server deployments

Eight-pack server interface units

This pack contains eight B078-101-USB-1 units that link USB-equipped servers to compatible B070- or B072-series NetCommander KVM switches. Each unit is new and ready for rack deployment without additional software.

HD15, USB-A and RJ45 connections

Every unit provides a male HD15 connector, two male USB-A connectors and a female RJ45 port so a single Cat5e cable carries video, keyboard and mouse signals. The bundled eight-pack simplifies large-scale rollouts by supplying identical interfaces for multiple servers at once.

Cat5e distance and series constraints

The link relies on Cat5e cabling between the server interface and the KVM switch, so cable length and quality set the practical reach. Only B070- and B072-series NetCommander switches are supported; other KVM models will not work with these units.

Highlights

  • Connect up to eight USB servers with one 8-pack of interface units
  • Link each server to B070 or B072 NetCommander switches via Cat5e cable
  • Install quickly with no software or drivers required
  • Each unit provides HD15 video and USB-A connections for server side
  • Package includes eight B078-101-USB-1 units for multi-server deployments

Specifications

BrandTRIPP LITE
ModelB078-101-USB-8
TypeUSB
FeaturesCONNECTIONS:
Connector A: RJ45 (FEMALE)
Connector B: HD15 (MALE) & USB-A (MALE)
Connector C: USB A (MALE)
8-Pack of B078-101-USB-1 Server Interface Units
Needed to connect a USB Server to a B070 / B072-Series NetCommander KVM switch via Cat5e cable
Eliminates the need for thicker, heavier KVM cables
Compact, lightweight design
Plug and Play; no software required
No power supply required
Allows a Server/CPU to be located up to 100ft away from the KVM switch
Weight20
Package Contents(x8) B078-101-USB-1 USB Server Interface Units (SIU)
Shipping weight2.40 kg
Package size483 × 339 × 229 mm

Questions about this item

Do the HD15 and USB-A connectors on each server interface unit wear out and need replacement?

The HD15 male and USB-A male connectors are rated for standard mating cycles; no user-serviceable parts exist inside the unit.

What is the maximum cable length before signal loss appears on the Cat5e link?

Cat5e cable runs up to 15 metres are supported between the server interface unit and the B070 or B072-series NetCommander switch.

Does the unit generate noticeable heat or fan noise when left running continuously?

The server interface unit is passive with no fan or active circuitry, so it produces no audible noise and negligible heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.