We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three blue ARGB extension cables, 30 cm, 16 AWG, 5 V 3-pin female to female

Tripp Lite 3-Pack ARGB Extension Cable 30cm 16 AWG 5V 3-Pin Female to Female

SKU CH-PF0P-VQP7F

Three 30 cm 16 AWG female-to-female cables extend 5 V addressable RGB fans or LED strips from a single motherboard header

  • TypeExtension Cable
  • ColorBlue
  • Length26" - 30"
  • Connector Number5
  • Terminal GenderFemale to Female
  • SpecificationsUL
  • Three cables let you extend multiple ARGB devices at once
  • 16 AWG copper core handles 5 V addressable RGB power reliably
  • 30 cm length gives flexible routing inside the chassis
  • Female-to-female 3-pin connectors plug straight into fans and strips
  • UL specification confirms the cable meets recognised safety standards

What this cable set does

This three-pack of Tripp Lite ARGB extension cables adds 30 cm of reach to 5 V addressable RGB devices. Each cable runs female-to-female so a motherboard 3-pin header can drive fans or LED strips that sit further away. The 16 AWG copper core handles the current without voltage drop. Builders extending existing ARGB runs use these to bridge the gap.

Included splitters and connectors

The pack supplies three 1-to-1 extension cables plus six loose 3-pin plugs for custom terminations. Additional 1-to-2 and 1-to-3 splitter cables are also bundled, letting one header feed two or three devices. All connectors are keyed; aligning the arrows prevents reversed polarity. No soldering is required — push the pins home and the link is live.

5 V 3-pin ARGB interface limits

These cables work only with 5 V 3-pin addressable RGB headers; they cannot connect to 4-pin 12 V RGB headers. The 30 cm length suits typical chassis routing but will not span full-tower distances. Signal integrity depends on the motherboard’s ARGB controller current limit, which the cables do not increase. Exceeding that limit causes flicker or shutdown.

Highlights

  • Three cables let you extend multiple ARGB devices at once
  • 16 AWG copper core handles 5 V addressable RGB power reliably
  • 30 cm length gives flexible routing inside the chassis
  • Female-to-female 3-pin connectors plug straight into fans and strips
  • UL specification confirms the cable meets recognised safety standards

Specifications

BrandTripp Lite
TypeExtension Cable
ColorBlue
Length26" - 30"
Connector Number5
Terminal GenderFemale to Female
SpecificationsUL
Wire Gauge16 AWG
FeaturesARGB

Questions about this item

Will the 16 AWG copper cores need replacement after continuous 5 V ARGB use?

The 16 AWG copper conductors are rated for the 5 V addressable RGB current draw and do not degrade under normal PC operation.

What stops me from daisy-chaining more strips beyond the 30 cm leads?

Each 30 cm extension adds resistance; the 5 V 3-pin ARGB header current limit is reached before cable length becomes an issue.

Do the PVC-insulated 16 AWG wires stay cool when the ARGB headers run all day?

At 5 V the current stays low, so the 16 AWG copper and PVC jacket remain at safe temperatures during continuous use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.