Tripp Lite
Tripp Lite 17.3kW 3 Phase Switched PDU 30-Outlet Vertical 0U Rack Mount
A switched three-phase PDU delivering 17.3 kW at 240 V from a 415 V supply with 30 locking outlets, remote IPv4/IPv6 management, and 0U vertical rack mounting
- TypeConsumer Electronics
- Switched 3-phase control for 30 outlets
- 3 kW capacity at 415 V three-phase input
- Vertical 0U design fits 70" rack height
- IEC 60320 C13 and C19 receptacles with overload protection
- Remote management via IPv4 IPv6 HTTP HTTPS SNMP SSH
Rack PDU for three-phase power
The Tripp Lite switched PDU delivers 17.3 kW at 240 V AC from a 415 V three-phase feed. It mounts vertically in a 0U footprint and provides 30 locking outlets for dense rack deployments. Network management is built in for remote outlet control and monitoring.
30 mixed IEC outlets
Six C19 and 24 C13 receptacles accept a wide range of server and network equipment cords. The 30 A IEC 60309 3P+N+E input plug connects to the three-phase source. Overload protection guards every connected device.
Passive cooling in a 70-inch chassis
The 70 inch by 2.2 inch by 2.5 inch aluminium housing dissipates heat without fans, so the unit adds no audible noise to the rack. Power draw is limited to the attached load up to the 17.3 kW rating. The 17.6 lb weight is supported by the included mounting brackets.
Highlights
- Switched 3-phase control for 30 outlets
- 3 kW capacity at 415 V three-phase input
- Vertical 0U design fits 70" rack height
- IEC 60320 C13 and C19 receptacles with overload protection
- Remote management via IPv4 IPv6 HTTP HTTPS SNMP SSH
Specifications
| Brand | Tripp Lite |
|---|---|
| Type | Consumer Electronics |
Questions about this item
What does the 17.3 kW power rating mean for actual rack equipment?
It represents the maximum three-phase load the unit can deliver at 415 V input and 240 V output, limited to 24 A per phase.
How does the IEC 60309 30 A 3P+N+E input connector constrain installation?
It requires a matching 30 A three-phase source with neutral and earth pins, capping total input current at 24 A per phase.
What physical space does the 70-inch vertical 0U chassis need in the rack?
The unit occupies the full 70-inch height, 2.2-inch width and 2.5-inch depth of a standard cabinet side channel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



