Tripp Lite
Tripp Lite 16-Port Cat5 KVM over IP Switch 19 in LCD 1U Rack-Mount TAA
A 16-port Cat5 KVM over IP switch with a built-in 19-inch LCD in a 1U rack-mount chassis, TAA compliant
- TypeKVM Switchbox
- 16-port Cat5 KVM consolidates server control
- 19-inch LCD provides local console access
- IP-based remote management enables off-site administration
- 1U rack-mount form factor saves cabinet space
- TAA compliance meets government procurement standards
16-Port KVM over IP Switch
This 16-port KVM over IP switch manages up to sixteen servers from a single console or remote session. It is built for data-centre administrators who need secure, out-of-band access to rack-mounted equipment. The integrated 19-inch LCD provides local control without a separate monitor. TAA compliance qualifies it for federal and government procurement.
1U Rack-Mount with Integrated LCD
The unit occupies one rack unit and includes a built-in 19-inch LCD panel, keyboard and touchpad that slide into the rack when not in use. Cat5 cabling connects the switch to server modules, reducing cable bulk compared to traditional KVM bundles. A single local user and one remote IP user can operate the console simultaneously. The compact form factor suits dense rack environments where space is limited.
Passive Cooling in Standard Racks
The switch relies on passive convection within a standard server rack airflow, so it adds no active fan noise to the room. Power draw remains low because the LCD backlight and switching logic are the only active components. Heat output is minimal and dissipates through the vented chassis without requiring additional cooling capacity. This makes it suitable for quiet equipment rooms or office-adjacent racks.
Highlights
- 16-port Cat5 KVM consolidates server control
- 19-inch LCD provides local console access
- IP-based remote management enables off-site administration
- 1U rack-mount form factor saves cabinet space
- TAA compliance meets government procurement standards
Specifications
| Brand | TRIPP LITE |
|---|---|
| Type | KVM Switchbox |
Questions about this item
How many servers can the 16-port Cat5 KVM over IP switch control?
The switch supports up to 16 connected servers through its Cat5 ports, with one local and one remote user accessing the console at any time.
What rack space does the 19-inch LCD console require for mounting?
The integrated 19-inch LCD console occupies a single 1U rack-mount slot, fitting standard 19-inch server racks without additional shelf hardware.
How is the KVM over IP switch initially configured for remote access?
Connect the unit to the network, then use the front-panel LCD menu to assign a static IP address before accessing the web interface for full setup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



