We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rackmount PDU with eight front outlets, digital amp meter, network card, twelve-foot cord and L5-20P plug

Tripp Lite

Tripp Lite 1.9kW Monitored PDU 8x5-15/20R L5-20P 12ft 1U LX TAA

SKU CH-GSMR-HG008

Monitored 1.9kW PDU with 8 outlets, 12 ft cord and LX network interface for remote load tracking

  • TypeMonitored
  • Monitored 1.9 kW load capacity via 8 5-15/20R outlets
  • Real-time remote monitoring of amps, volts and frequency
  • Built-in LX Platform network management interface card
  • 1U horizontal or 0U vertical rack-mount with all-metal housing
  • 12 ft cord with L5-20P plug and 5-20P adapter

Monitored PDU for rack power management

The Tripp Lite 1.9kW Monitored PDU distributes 120V power through eight 5-15/20R outlets from a single L5-20P input with an included 5-20P adapter. A built-in LX Platform network interface enables real-time remote monitoring of load level, voltage and frequency, with optional environmental and security sensors. The 1U all-metal chassis mounts horizontally or vertically in standard racks. A front-panel digital meter shows current draw in amps for immediate local visibility.

Check rack space and inlet plug compatibility

Verify that your rack has 1U of horizontal space or a suitable 0U vertical mounting location for the all-metal housing. Confirm the facility provides a 20 A L5-20R receptacle or a 5-20R outlet for the supplied adapter; the 12 ft cord length determines placement reach. Ensure the eight 5-15/20R outlets match the plug types of the equipment you intend to power. The unit was first listed by the manufacturer in 2022, so firmware and platform features reflect that baseline.

Thermals, noise and power draw in normal use

The PDU operates passively with no internal fans, so it adds no audible noise to the rack environment. Heat output is limited to the minimal losses of the monitoring electronics and outlet bus bars under load. The digital meter draws negligible power while displaying real-time amperage. Total connected equipment must not exceed the 1.9 kW (20 A at 120 V) rating; the LX Platform interface reports load, voltage and frequency continuously to help stay within that limit.

Highlights

  • Monitored 1.9 kW load capacity via 8 5-15/20R outlets
  • Real-time remote monitoring of amps, volts and frequency
  • Built-in LX Platform network management interface card
  • 1U horizontal or 0U vertical rack-mount with all-metal housing
  • 12 ft cord with L5-20P plug and 5-20P adapter

Specifications

TypeMonitored

Questions about this item

What outlets and plug does the unit ship with, and do I need to buy a separate cord or adapter?

The PDU includes eight 5-15/20R outlets, a 12-ft cord, an L5-20P plug and a 5-20P adapter, so no extra cord or adapter is required for standard rack power connections.

Should I choose a horizontal or vertical mounting orientation for my 1U rack space?

The 1U chassis supports both 1U horizontal and 0U vertical mounting; select horizontal if you want it inside the 1U slot, or vertical if you prefer to run it along the side of the cabinet.

What does the 1.9 kW rating mean for the actual load I can connect?

At 120 V the 1.9 kW rating equals the 20 A circuit limit, so the total connected equipment must not draw more than 20 A continuously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.