Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00931541BTC
In stock
Trine Access Technology
Trine Access Technology TR007 Electric Door Strike 8-16 VAC 1000 lbs
Light commercial electric door strike holds 1000 lbs, rated for 500000 cycles at 8-16 VAC
- FinishSatin Brass
- Selling UnitBox
- Holds 1000 lbs for strong forced-entry resistance
- 500000 life cycles deliver long-term reliability
- 8-16 VAC range fits common access-control power supplies
- Brass powder-coated finish resists corrosion in commercial settings
- Cavity dimensions suit standard mortise prep in wood jambs
Light Commercial Electric Door Strike
The Trine TR007 is a new light commercial electric door strike finished in satin brass powder coat. It operates on 8 to 16 VAC and fits a standard 4-7/8 by 1-1/4 inch face plate. The unit suits wood jamb installations in commercial settings.
Replaces mechanical strikes for access control
This strike upgrades a purely mechanical latch by adding electronic release for access control systems. The jump is worth it when you need remote or timed entry without replacing the existing lockset. It supports locksets with up to a 3/4 inch throw based on a 1/8 inch door gap.
AC voltage and cavity depth set practical limits
The 8 to 16 VAC requirement means a compatible transformer must be supplied; DC or higher voltage sources will not work. The mortise cavity demands a depth of 5/8 inch, width of 3/4 inch and height of 1-1/2 inch, so the jamb must accommodate these exact dimensions. The strike is rated for 1000 lbs holding force and 500000 life cycles.
Highlights
- Holds 1000 lbs for strong forced-entry resistance
- 500000 life cycles deliver long-term reliability
- 8-16 VAC range fits common access-control power supplies
- Brass powder-coated finish resists corrosion in commercial settings
- Cavity dimensions suit standard mortise prep in wood jambs
Specifications
| Brand | Trine Access Technology |
|---|---|
| Model | TR007 |
| Finish | Satin Brass |
| Selling Unit | Box |
Questions about this item
Will the 4-7/8" x 1-1/4" face plate cover my existing mortise cutout?
The face plate measures 4-7/8" x 1-1/4" and fits a mortise backset of 2-7/8"; verify your door jamb matches those dimensions before mounting.
Which wires connect to the 8-16 VAC terminals, and what polarity matters?
Connect the two low-voltage AC leads to the strike terminals; AC has no polarity, but the step often missed is confirming the transformer delivers 8-16 VAC under load.
How often should I lubricate the latch cavity to reach 500000 cycles?
Apply a light dry lubricant to the 5/8" deep cavity every six months; avoid oil-based products that attract dust and reduce the rated 1000 lbs holding force.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
