We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Satin brass electric door strike with rectangular faceplate

Trine Access Technology

Trine Access Technology TR004 Door Lock Satin Brass 8-16 VAC

SKU CH-HH86-M5C2X MPN TR004

Light commercial electric door strike with brass powder-coated finish, 8–16 VAC operation, 1000 lbs holding force and 500000 life cycles

  • FinishSatin Brass
  • Selling UnitBox
  • Light commercial strike rated for 500000 cycles
  • 1000 lbs holding force secures heavy doors
  • 8-16 VAC operation fits common access systems
  • Brass powder coat resists wear and corrosion
  • Deadbolt knockouts simplify wood-jamb replacement

Light Commercial Electric Door Strike

The Trine TR004 is a satin brass electric strike built for light commercial access control. It fits wood jambs and works with locksets that have individual deadbolts and a 5/8 inch throw on an 1/8 inch door gap. Deadbolts cannot be released electrically, so manual operation is still required for the bolt. Installers get a direct replacement unit with a powder coated finish.

Capacity and headroom for access control

Rated at 500000 life cycles, the strike handles repeated daily traffic in offices or shared entrances. Holding force reaches 1000 lbs, keeping the door secure against forced entry attempts. The cavity measures 1/2 inch deep by 9/16 inch wide by 1-1/2 inches high, so the mortise pocket must match these dimensions exactly. Larger bolts or deeper cavities will not fit this model.

Voltage interface limits

Operation requires 8 to 16 VAC from a compatible transformer or power supply. The face plate dimensions are 6-1/4 inch by 1-3/8 inch with a 2-3/4 inch backset, fixing the cutout size in the jamb. Deadbolt knockouts at top and bottom measure 1-11/16 inch by 9/16 inch, limiting which locksets can be used. No DC or higher voltage input is supported.

Highlights

  • Light commercial strike rated for 500000 cycles
  • 1000 lbs holding force secures heavy doors
  • 8-16 VAC operation fits common access systems
  • Brass powder coat resists wear and corrosion
  • Deadbolt knockouts simplify wood-jamb replacement

Specifications

BrandTrine Access Technology
ModelTR004
FinishSatin Brass
Selling UnitBox

Questions about this item

Will the 8-16 VAC strike fit my existing 2-3/4" backset lock preparation?

The TR004 is built for a 2-3/4" mortise backset and a 6-1/4" x 1-3/8" face plate, matching standard light-commercial wood-jamb cutouts for locksets with a 5/8" deadbolt throw.

How can I confirm the strike is operating correctly after wiring it to my access control system?

Apply 8-16 VAC to the coil; the keeper should release cleanly each cycle. The unit is rated for 500000 life cycles and a 1000 lbs holding force, so consistent release and solid relock indicate proper function.

What comes in the box and what must I supply separately?

The box contains one TR004 electric strike with brass powder-coated finish. You must provide an 8-16 VAC transformer, wiring, mounting screws and a compatible lockset with a 5/8" throw deadbolt.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.