Trim
Trim C270 Cutting and Grinding Fluid 1 gal PK4
Cutting and grinding fluid for sawing, drilling, reaming, milling and turning, supplied as four one-gallon jugs
- TypeFluids & Lubricants
- Formulated for sawing, grinding, drilling, reaming, milling and turning
- Light yellow fluid allows visual monitoring during machining operations
- One-gallon jugs simplify handling and storage in the workshop
- Pack of four provides a ready supply for high-volume use
- Ships free on qualifying orders of $75 or more
Trim C270 Cutting Fluid for Metalworking
Trim C270 is a cutting and grinding fluid designed for machining operations. It supports sawing, grinding, drilling, reaming, milling and turning tasks. The light yellow fluid comes in one-gallon jugs sold as a four-pack. It is intended for workshops that need a general-purpose coolant for metal removal.
Sustained Use in Machining Applications
The fluid maintains lubricity during extended cutting cycles to reduce tool wear. It helps flush chips away from the work zone during continuous operations like milling or turning. Consistent coolant flow supports dimensional accuracy on long production runs. The formulation resists breakdown under the heat generated by sustained metal removal.
Thermal Management and Consumption
The fluid carries heat away from the cutting interface to protect both the tool and the workpiece. It reduces friction at the shear zone which lowers the energy required for each pass. Operators observe lower spindle loads when the coolant is applied correctly. The one-gallon containers allow easy refilling of machine sumps without excessive handling.
Highlights
- Formulated for sawing, grinding, drilling, reaming, milling and turning
- Light yellow fluid allows visual monitoring during machining operations
- One-gallon jugs simplify handling and storage in the workshop
- Pack of four provides a ready supply for high-volume use
- Ships free on qualifying orders of $75 or more
Specifications
| Brand | TRIM |
|---|---|
| Type | Fluids & Lubricants |
Questions about this item
Does the Trim C270 fluid generate fumes or heat when used continuously for grinding?
The fluid is formulated for sawing, grinding, drilling, reaming, milling and turning, helping to control heat and extend tool life during extended operations.
What equipment is required to use this cutting and grinding fluid?
It is applied directly in machining operations such as sawing, grinding, drilling, reaming, milling and turning, so a compatible machine tool or coolant system is needed.
Can the Trim C270 fluid be used with older manual lathes and mills?
Yes, the fluid suits turning and milling applications on both manual and CNC equipment, providing lubrication and cooling for legacy machines.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
