Tributaries
Tributaries PWRI-XF-060 In-Wall Power Extension 6ft with Filter
In-wall power extension kit with built-in filtration and dual outlets for remote equipment connections
- TypeCar Stereo Add-Ons
- Extra filtration cleans Romex interference
- Two outlets fit dual-gang Carlon or Raco boxes
- Large copper chokes eliminate line noise
- Locking blue Neutrik connector is UL rated
- Extends surge protection from a suppressor to remote devices
In-wall power extension with filter
The Tributaries PWRI-XF-060 extends filtered power from a surge suppressor to a remote device location. It adds a second filtration layer to clean interference from unshielded in-wall cabling. The kit includes two outlets designed to fit dual-gang Carlon or Raco boxes. This keeps remote electronics on the same ground reference as the main system.
Sustained filtration for continuous operation
Large copper chokes inside the unit eliminate line noise continuously rather than only during brief transients. The extra filtration stage works alongside a primary surge suppressor to maintain clean power over long cable runs. Ground-loop risk is reduced by keeping the remote device on the shared system ground. Performance remains stable during extended use without degradation.
Locking Neutrik connector and dual-gang mount
A blue UL-rated Neutrik twist-to-lock connector secures the link to the inlet wall plate with no exposed contacts. The connector only allows current flow when fully inserted and locked in place. Dual-gang box compatibility accommodates the internal choke assembly for effective noise rejection. The design supports safe, permanent in-wall installation behind finished surfaces.
Highlights
- Extra filtration cleans Romex interference
- Two outlets fit dual-gang Carlon or Raco boxes
- Large copper chokes eliminate line noise
- Locking blue Neutrik connector is UL rated
- Extends surge protection from a suppressor to remote devices
Specifications
| Type | Car Stereo Add-Ons |
|---|
Questions about this item
How much heat or noise does the PWRI-XF-060 generate when powering equipment continuously?
The unit contains only passive copper chokes and a locking connector, so it produces no audible noise and negligible heat during all-day operation.
What existing surge suppressor or power conditioner must I already have to use this extension kit?
It is designed to extend filtration from a surge suppressor such as the Tributaries T10X to a remote location, so a compatible upstream unit is required.
Will the blue Neutrik twist-lock inlet work with standard AC plugs on older amplifiers or receivers I want to keep?
The inlet accepts only the matching locking connector; standard IEC or NEMA plugs cannot be inserted, so an adapter or the supplied mating connector is necessary.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



