TREVA/O2COOL FC05807 Clip Fan 2 Speeds Gray
Battery-powered clip fan offers two speeds and five plastic blades for portable cooling
- ColorWhite
- typeTraffic & Parking Lot
- Compact clip design fits tight spaces
- Two-speed motor gives 891 RPM high and 297 RPM low airflow
- Battery powered at 1.5 W for portable cooling
- Five ABS and polypropylene blades move air quietly
- FCC and RoHS compliant for safe operation
Clip-on cooling fan for tabletop use
The TREVA/O2COOL FC05807 is a battery-powered clip fan designed for tabletop placement. Its compact form suits personal cooling in offices, bedrooms or similar indoor spaces where a mains outlet is not convenient. The unit ships new in a neutral gray finish.
Two-speed motor with low power draw
The fan runs at 1.5 W and 0.36 A across two fixed speeds: 891 RPM on the higher setting and 297 RPM on the lower. A sleeve bearing supports the five-blade plastic impeller. Operation is non-oscillating, so airflow remains directed at a single zone.
Battery power and compliance marks
Power comes from user-supplied batteries; no cord or adapter is included. The housing uses ABS and polypropylene blade materials. The product carries FCC and RoHS compliance markings. Buyers who need oscillation, USB charging or mains operation should consider other form factors.
Highlights
- Compact clip design fits tight spaces
- Two-speed motor gives 891 RPM high and 297 RPM low airflow
- Battery powered at 1.5 W for portable cooling
- Five ABS and polypropylene blades move air quietly
- FCC and RoHS compliant for safe operation
Specifications
| Brand | TREVA/O2COOL |
|---|---|
| Color | White |
| type | Traffic & Parking Lot |
Questions about this item
How do I attach the clip fan to a surface, and what is the common mistake with the clip?
Squeeze the spring-loaded clip to open the jaws, position it on a tabletop edge or similar surface up to the maximum jaw opening, then release. The step people get wrong is not opening the clip fully before placement, which can leave the fan loosely attached.
What maintenance or replacement will the clip fan need over time?
The sleeve bearing and 5 plastic blades may accumulate dust; wipe the blades and housing with a dry cloth periodically. If the motor slows or noise increases, the bearing cannot be lubricated and the unit would need replacement.
What limit appears first during continuous use of the clip fan?
Battery runtime is the first limit; the 1.5 W motor draws 0.36 A, so a typical D-cell pack will last only a few hours at the 297 RPM low speed and less at 891 RPM high speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BFKK 100 Key Lock Box Wall Mount 17 x 12.99 x 3.26 Black
- Deadbolt Latches



