We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black network injector with two Ethernet ports and power adapter

TRENDnet

TRENDnet TPE-318GI 10G PoE++ Injector 90W

SKU CH-1FWJ-HZNND MPN TPE-318GI

Converts a non-PoE 10G port to PoE++ delivering up to 90W over 100m of Cat6A cabling

  • TypePoE++ Injector
  • SpecificationsInterfaces/Ports: Input Ports: 1 x 10 Gigabit Ethernet Outpu
  • FeaturesConverts a non-PoE port to a PoE++ 10G port Supplies PoE (15
  • Converts non-PoE ports to 10G PoE++ with up to 90W power
  • Auto-sensing delivers correct wattage for PoE, PoE+ and PoE++ devices
  • 10GBASE-T compliant for 10 Gigabit Ethernet speeds
  • Networks PoE devices up to 100m over Cat6A or better cabling
  • IEEE 802.3af, 802.3at and 802.3bt compliant for broad device compatibility

10G PoE++ Injector for High-Power Devices

The TRENDnet TPE-318GI adds 10GBASE-T PoE++ capability to a non-PoE network port. It auto-detects connected hardware and supplies the correct IEEE 802.3af, 802.3at or 802.3bt power class. The unit delivers up to 90W to compatible access points, cameras or VoIP endpoints over a single cable run.

Sustained 90W Delivery Over 100 Metres

The injector maintains full 90W output continuously without thermal throttling across the 100 metre Cat6A distance limit. Auto-sensing technology matches the exact wattage required by each attached device, whether it draws 15.4W, 30W or the full 90W budget. The 54V DC 1.67A adapter feeds stable power under constant load.

Wall-Mount Install with Cat6A Requirement

A wall-mountable chassis and included quick installation guide keep physical setup straightforward. The single 10 Gigabit input and PoE++ output ports leave no ambiguity about cable routing. Installers must use Cat6A or better cabling; lesser categories will not support the 10G signal or the 100 metre reach. NDAA and TAA compliance satisfies federal procurement rules.

Highlights

  • Converts non-PoE ports to 10G PoE++ with up to 90W power
  • Auto-sensing delivers correct wattage for PoE, PoE+ and PoE++ devices
  • 10GBASE-T compliant for 10 Gigabit Ethernet speeds
  • Networks PoE devices up to 100m over Cat6A or better cabling
  • IEEE 802.3af, 802.3at and 802.3bt compliant for broad device compatibility

Specifications

BrandTRENDnet
ModelTPE-318GI
Part NumberTPE-318GI
TypePoE++ Injector
SpecificationsInterfaces/Ports:
Input Ports: 1 x 10 Gigabit Ethernet
Output Ports: 1 x PoE++
Form Factor:
Wall Mountable
Package Contents:
10G PoE++ Injector
Quick Installation Guide
Power adapter (54V DC, 1.67A)
Compatibility:
Wireless Access Points
IP Cameras
VoIP Phone Systems
IPTV Decoders
Access Controls
Certifications & Standards:
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3an
IEEE 802.3at
IEEE 802.3bt
IEEE 802.3bz
FeaturesConverts a non-PoE port to a PoE++ 10G port
Supplies PoE (15.4W), PoE+ (30W), or PoE++ (90W)
10GBASE-T compliant
Network a PoE device up to 100m (328 ft.) over Cat6A or better cabling
Save on installation and equipment costs
IEEE 802.3af, 802.3at, and 802.3bt compliant
NDAA / TAA compliant (U.S. and Canada only)
Shipping weight0.73 kg
Package size185 × 132 × 89 mm

Questions about this item

Does the 90 W PoE++ injector run hot or make noise when powering a device all day?

The TPE-318GI has no fan and uses passive cooling, so it operates silently. Normal warmth is expected when delivering up to 90 W continuously.

What cable and switch do I already need to use this injector at 10 Gbps?

You need a non-PoE switch with a 10GBASE-T port and Cat6A or better Ethernet cable to reach the full 100 m distance.

Will the injector work with my older 802.3af access point and 802.3at IP camera on the same network?

Yes, it auto-senses and supplies 15.4 W for 802.3af devices, 30 W for 802.3at devices, or 90 W for 802.3bt devices.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.