We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal box with two RJ-45 ports and power cord

TRENDnet

TRENDnet TPE-219GI 2.5G PoE++ Injector 2 in 1 accessory

SKU CH-97D8-X9KVV

Delivers up to 90 W of PoE++ power over a 2.5 Gbps link to devices 100 m away

  • Delivers up to 90 W to PoE++ devices
  • Auto-sensing supplies 15.4 W, 30 W or 90 W as needed
  • Extends power and data up to 100 m (328 ft) over Cat5e
  • 5 Gbps network speed via 2.5GBASE-T RJ-45 port
  • Compliant with IEEE 802.3bt, 802.3at and 802.3af standards

2.5G PoE++ Injector for Network Devices

The TRENDnet TPE-219GI adds 2.5GBASE-T Power over Ethernet to a standard network switch. It targets installers who need to power wireless access points, IP cameras, VoIP phones or IPTV decoders without running separate AC lines. The unit accepts a non-PoE uplink and delivers both data and power over a single Ethernet cable. It is not suited for networks limited to 1Gbps uplinks or for devices that require more than 90W.

90W PoE++ with auto-sensing 15.4W, 30W, 45W steps

The injector supplies up to 90W per port and automatically detects the correct class for PoE, PoE+ or PoE++ endpoints. It comfortably handles high-power pan-tilt-zoom cameras, multi-radio access points and powered access-control panels. Headroom ends at the 90W ceiling; devices needing more power or redundant feeds will require a PoE++ switch or midspan with higher per-port budgets.

Metal housing with integrated supply and 100m reach

A rugged metal enclosure shields the integrated power supply and two 2.5G RJ-45 ports for daily operation in wiring closets or wall-mounted enclosures. One port carries data only; the second adds PoE++ output for runs up to 100 metres (328 ft) over Cat5e or better cabling. The fixed AC cord and lack of rack ears mean the unit sits on a shelf or mounts with adhesive brackets rather than sliding into a 19-inch rack.

Highlights

  • Delivers up to 90 W to PoE++ devices
  • Auto-sensing supplies 15.4 W, 30 W or 90 W as needed
  • Extends power and data up to 100 m (328 ft) over Cat5e
  • 5 Gbps network speed via 2.5GBASE-T RJ-45 port
  • Compliant with IEEE 802.3bt, 802.3at and 802.3af standards

Specifications

No published specifications for this item yet.

Questions about this item

Will the 2.5GBASE-T RJ-45 port work with my existing Cat5e cabling?

Yes, the injector provides network speeds up to 2.5Gbps over existing Cat5e or better cabling.

How can I verify the injector is delivering the correct PoE wattage after installation?

The auto-sensing technology automatically detects and supplies the required 15.4W, 30W, or 90W to the connected device.

Does the TPE-219GI include the Ethernet cables needed to connect my switch and PoE device?

The unit has an integrated power supply and two 2.5G RJ-45 ports; Ethernet cables are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.