We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular network injector with two Ethernet ports and power lead

TRENDnet

TRENDnet TPE-116GI 60W PoE++ Injector

SKU CH-0A3H-C0ZWW

Adds up to 60W PoE++ power to a gigabit link for devices up to 100 meters away

  • TypeSwitches
  • Features• Supplies PoE (15.4W), PoE+ (30W) and PoE++ (60W) • Network
  • Delivers up to 60W PoE++ power for demanding devices
  • Networks PoE devices up to 100 meters (328 ft.) away
  • Converts a non-PoE gigabit port to a PoE gigabit port
  • Reduces installation and equipment costs with single-cable deployment
  • Wall-mountable design with built-in internal power supply

Power Delivery Scope

The TRENDnet TPE-116GI is a 60 W PoE++ injector that merges data and power on a single gigabit Ethernet link. It serves installers who need to energise PoE, PoE+ or PoE++ endpoints without replacing existing non-PoE switching infrastructure.

Distance and Compliance Limits

The unit reaches powered devices up to 100 m (328 ft) away and adheres to IEEE 802.3af, 802.3at and 802.3bt standards. It is not suited for deployments requiring more than 60 W per port or for networks that cannot supply a gigabit data path to the injector.

Deciding Specification

The injector delivers a maximum of 60 W per port under the 802.3bt standard, auto-sensing the correct class for the connected device. If the endpoint demands higher power or a different power-over-Ethernet standard, this model will not meet the requirement.

Highlights

  • Delivers up to 60W PoE++ power for demanding devices
  • Networks PoE devices up to 100 meters (328 ft.) away
  • Converts a non-PoE gigabit port to a PoE gigabit port
  • Reduces installation and equipment costs with single-cable deployment
  • Wall-mountable design with built-in internal power supply

Specifications

BrandTRENDnet
ModelTPE-116GI
TypeSwitches
Features• Supplies PoE (15.4W), PoE+ (30W) and PoE++ (60W)
• Network a PoE device located up to 100 meters (328 ft.) away
• Converts a non-PoE gigabit port to a PoE gigabit port
• Save on installation and equipment costs
• Wall mountable for installation flexibility
• Built-in internal power supply
• IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt compliant
• NDAA / TAA compliant (U.S. and Canada only)

Questions about this item

How can I confirm the TPE-116GI is delivering the correct 60 W PoE++ power after connecting my device?

The injector uses auto-sensing technology to detect the attached device and supply the appropriate IEEE 802.3af 15.4 W, 802.3at 30 W or 802.3bt 60 W class. Verify operation by checking that the powered device boots and reports the expected power class in its management interface.

What comes in the box with the TPE-116GI and what must I provide separately?

The unit includes the Gigabit PoE++ injector with its built-in internal power supply. You must supply a non-PoE Gigabit switch or router, an Ethernet cable up to 100 meters (328 ft.) and the PoE device you intend to power such as an access point or IP camera.

Which PoE standard should I match when choosing a device for the TPE-116GI injector?

The injector supports IEEE 802.3af (15.4 W), IEEE 802.3at (30 W) and IEEE 802.3bt (60 W). Select a powered device that complies with any of these standards; the injector will automatically negotiate and deliver the correct wattage up to the 60 W maximum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.