TRENDnet
TRENDnet TPE-115GI Gigabit PoE+ Injector 30W
Adds PoE+ power to a Gigabit network link, delivering up to 30 W over 100 m
- TypeGigabit PoE+ Injector
- ColorBlack
- SpecificationsStandard: IEEE 802.3/3u/3ab, IEEE 802.3af/3at Ports: 1 x 10/
- FeaturesIEEE 802.3at PoE+ (30 Watt) compliant Backwards compatible w
- Delivers up to 30W PoE+ power to compatible devices
- Powers legacy PoE equipment at 15.4W automatically
- Extends network reach up to 100 meters (328 ft.)
- Adds PoE+ capability to any non-PoE Gigabit port
- Integrated power supply simplifies installation with no external brick
Gigabit PoE+ injector for non-PoE ports
This TRENDnet TPE-115GI injector adds IEEE 802.3at PoE+ or IEEE 802.3af PoE power to a standard Gigabit Ethernet link. It accepts 100–240 V AC input and supplies up to 30 W on the powered port. The unit is NDAA and TAA compliant and mounts on a wall.
Installers needing a single powered drop up to 100
Network teams who want to power a wireless access point, IP camera or VoIP phone without a PoE switch will find this injector simple and standards-based. Buyers who need to power multiple devices from one unit or require managed PoE features should look at a multi-port PoE switch instead.
30 W maximum PoE+ output on the powered port
The injector automatically negotiates 15.4 W PoE or 30 W PoE+ depending on the connected device. This single power budget is the deciding factor: if the end device draws more than 30 W, this model cannot supply it.
Highlights
- Delivers up to 30W PoE+ power to compatible devices
- Powers legacy PoE equipment at 15.4W automatically
- Extends network reach up to 100 meters (328 ft.)
- Adds PoE+ capability to any non-PoE Gigabit port
- Integrated power supply simplifies installation with no external brick
Specifications
| Brand | TRENDnet |
|---|---|
| Model | TPE-115GI |
| Type | Gigabit PoE+ Injector |
| Color | Black |
| Specifications | Standard: IEEE 802.3/3u/3ab, IEEE 802.3af/3at Ports: 1 x 10/100/1000 Mbps Data-In (Data only), 1 x 10/100/1000 Mbps PWR+Data out (Data + Power) PoE Delivery: Pair 1: Pin 1, 2; Pair 2: Pin 3, 6 Power: Input: 100~240 V, 50~60 Hz, 0.65 A max. Power Consumption: Max 30 Watts Dimensions: 5.2" x 2.5" x 1.4" Weight: 162 g (5.7 oz.) Certifications: CE, FCC |
| Features | IEEE 802.3at PoE+ (30 Watt) compliant Backwards compatible with IEEE 802.3af PoE (15 Watt) devices Automatically supplies a PoE+ (30 Watts) or PoE (15 Watts) connection to the device Integrated power supply Network devices for distances of up to 100 meters (328 ft.) 1 x 10/100/1000 Mbps Auto-MDIX Data In port 1 x 10/100/1000 Mbps PoE+ Auto-MDIX Data Out port Power port with LED indicator Easily install a PoE+ or PoE device where a power outlet is not available Reduce installation and network equipment costs Safeguards network devices with short circuit protection Package Contents: TP |
| Shipping weight | 0.40 kg |
| Package size | 211 × 107 × 51 mm |
Questions about this item
How much power does the TPE-115GI draw when supplying a full 30W PoE+ load all day?
The injector accepts 100~240 V input and delivers up to 30W PoE+ or 15.4W PoE; actual draw depends on the connected device and cable length up to 100 m.
What non-PoE Gigabit equipment must I already have to use this injector?
You need a standard Gigabit switch or router port for the Data-In side and a Cat5e or better cable run to the powered device.
Will the TPE-115GI work with my older 802.3af access points and IP cameras?
Yes, it is backwards compatible with IEEE 802.3af PoE devices and auto-senses to supply 15.4W instead of 30W.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Digi International 70001807 wireless accessory
- Consumer Electronics
- Black
RUCKUS WIRELESS PCUSA2 NEMA 5-15 to IEC 60320 C13 power cord
HP J9694A#ABA MSM720 Wireless LAN Controller
- Wireless LAN Contro…
- 4 RJ-45 autosensing…



