TRENDnet
TRENDnet TPE-114GI Gigabit PoE+ Injector 30W 100m
Injects up to 30W of PoE+ power over gigabit Ethernet, reaching devices up to 100 metres away
- TypeSwitches
- Features• Supplies PoE (15.4W) and PoE+ (30W) • Network a PoE device
- Delivers up to 30 W to power demanding PoE+ devices
- Extends power and data up to 100 m over a single Ethernet cable
- Adds PoE+ to any non-PoE gigabit port for instant compatibility
- Meets IEEE 802.3af and 802.3at standards for broad device support
- NDAA and TAA compliant for regulated government deployments
TRENDnet TPE-114GI Gigabit PoE+ Injector
The TRENDnet TPE-114GI is a Gigabit PoE+ injector that supplies up to 30W of power over a single Ethernet cable. It enables network administrators to deploy PoE devices such as wireless access points, IP cameras, or VoIP phones without requiring a PoE switch. The unit auto-senses the connected device to deliver the correct wattage, supporting both 15.4W PoE and 30W PoE+ standards. Its wall-mountable design offers flexible placement in equipment rooms or on walls.
Upgrading non-PoE gigabit links to PoE+
This injector converts an existing non-PoE gigabit port into a PoE+ enabled connection, eliminating the cost and complexity of replacing a switch. The upgrade is worth it when you need to power devices up to 100 meters (328 ft.) away from the network source. It complies with IEEE 802.3af and 802.3at standards for broad device compatibility. NDAA and TAA compliance makes it suitable for U.S. and Canadian government procurement requirements.
Plug-and-play setup with internal power supply
Installation is straightforward: connect the injector between your gigabit switch and the PoE device using standard Ethernet cables. The built-in internal power supply removes the need for an external power brick, reducing cable clutter. Auto-sensing technology handles power negotiation automatically, so no software configuration is required. Ensure the total cable run does not exceed the 100-meter limit for reliable data and power delivery.
Highlights
- Delivers up to 30 W to power demanding PoE+ devices
- Extends power and data up to 100 m over a single Ethernet cable
- Adds PoE+ to any non-PoE gigabit port for instant compatibility
- Meets IEEE 802.3af and 802.3at standards for broad device support
- NDAA and TAA compliant for regulated government deployments
Specifications
| Brand | TRENDnet |
|---|---|
| Model | TPE-114GI |
| Type | Switches |
| Features | • Supplies PoE (15.4W) and PoE+ (30W) • Network a PoE device located up to 100 meters (328 ft.) away • Converts a non-PoE gigabit port to a PoE gigabit port • Save on installation and equipment costs • Wall mountable for installation flexibility • Built-in internal power supply • IEEE 802.3af and IEEE 802.3at compliant • NDAA / TAA compliant (U.S. and Canada only) |
Questions about this item
What mounting options does the TPE-114GI injector provide for wall installation?
The injector is wall mountable, allowing flexible placement near a power outlet and the non-PoE gigabit switch it connects to.
How do I correctly connect the TPE-114GI to power a PoE+ device up to 100 meters away?
Link a non-PoE gigabit switch to the injector's data-in port, then run a single Ethernet cable from the injector's PoE port to the powered device; the unit auto-senses and delivers up to 30W.
Does the TPE-114GI require any internal component replacement or scheduled maintenance over time?
No user-serviceable parts are inside; the built-in internal power supply is sealed, so the injector operates without periodic maintenance or component swaps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Digi International 70001807 wireless accessory
- Consumer Electronics
- Black
RUCKUS WIRELESS PCUSA2 NEMA 5-15 to IEC 60320 C13 power cord
HP J9694A#ABA MSM720 Wireless LAN Controller
- Wireless LAN Contro…
- 4 RJ-45 autosensing…



