We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
TRENDnet TI-SG704 industrial PoE++ splitter metal enclosure DIP switch voltage selector

TRENDnet

TRENDnet TI-SG704 Industrial 10G PoE++ Splitter

SKU CH-F4M8-4WB5E

Splits a 10G 90W PoE++ signal into separate power and data for non-PoE devices up to 100m away with adjustable 12V, 16V, 24V or 48V output and industrial -40 to 75°C operation

  • Powers non-PoE gear up to 100m (328 ft.) from the PSE
  • Splits 10G 90W PoE++ into separate 10G data and adjustable DC power
  • DIP switch selects 12V, 16V, 24V or 48V output for device compatibility
  • Operates reliably from -40 to 75°C (-40 to 167°F) in industrial settings
  • Meets IEEE 802.3bt and NDAA/TAA compliance for regulated projects

Industrial 10G PoE++ Splitter for Non-PoE Devices

The TI-SG704 splits a single 10G 90W PoE++ signal into separate data and DC power sources, letting you network a non-PoE device up to 100m (328 ft.) from the power sourcing equipment. It is IEEE 802.3bt compliant and NDAA/TAA compliant for U.S. and Canada procurement. A DIP switch adjusts the output to 12V, 16V, 24V, or 48V to match the connected device.

Installers Needing Remote Power Without New Cabling

This splitter suits technicians who must power cameras, access points, or sensors in harsh environments where AC outlets are absent and temperatures swing from -40 to 75°C (-40 to 167°F). It is not for buyers who need a managed switch, fibre uplinks, or the ability to run more than two endpoints from one PoE++ source.

Simple DIP-Switch Setup With Industrial Mounting

Configuration is a matter of setting the voltage DIP switch to 12, 16, 24, or 48 volts before connecting the PoE++ input and the target device. The most common issue is mismatching the voltage to the load, which can prevent the device from starting or trigger the splitter’s protection circuit. Pairing with a compliant PoE++ switch or injector ensures full 90W delivery over the full 100m run.

Highlights

  • Powers non-PoE gear up to 100m (328 ft.) from the PSE
  • Splits 10G 90W PoE++ into separate 10G data and adjustable DC power
  • DIP switch selects 12V, 16V, 24V or 48V output for device compatibility
  • Operates reliably from -40 to 75°C (-40 to 167°F) in industrial settings
  • Meets IEEE 802.3bt and NDAA/TAA compliance for regulated projects

Specifications

No published specifications for this item yet.

Questions about this item

What PoE switch or injector do I need to feed the TI-SG704?

Connect it to any IEEE 802.3bt compliant PoE++ source delivering up to 90 W; TRENDnet PoE++ switches or injectors are recommended for best performance.

Will the splitter pass 10 Gbps traffic to my existing 1 Gbps cameras and sensors?

Yes, the 10G data port auto-negotiates down to 1 Gbps or 100 Mbps, so legacy Ethernet devices keep working at their rated speed.

How do I confirm the TI-SG704 is delivering the correct voltage to my 24 V access point?

Set the DIP switch to 24 V, power the PoE++ link, then measure the DC output terminals with a multimeter; the LED indicators also show active power and data status.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.