TRENDnet
TRENDnet TEW-755AP N300 PoE access point
N300 PoE access point with Gigabit LAN port, software controller for multi-device management, and ceiling-mountable IP30 housing
- StandardsIEEE 802.1Q IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab
- Wireless Data RatesUp to 300Mbps
- Frequency Band2.4 GHz: 2.412 – 2.472 GHz
- Antenna2.4 GHz: 2 x 4 dBi
- Receiver Sensitivity802.11a: 15 dBm (typical) / -65 dBm (typical) @ 54 Mbps 802.
- ModulationDBPSK / DQPSK / CCK for DSSS technique BPSK / QPSK / 16-QAM
- N300 wireless speeds up to 300 Mbps for fast local traffic
- PoE Gigabit port powers the unit over a single network cable
- Software controller manages multiple access points from one Windows console
- IP30 rated housing with mounting plate simplifies ceiling or wall installation
- Supports AP, Client, WDS AP, WDS Bridge, WDS Station and Repeater modes
N300 PoE access point for small networks
The TEW-755AP creates a 2.4 GHz wireless network at up to 300 Mbps using 802.11n. It supports access point, client, WDS bridge, WDS station and repeater modes. A Windows-based software controller manages multiple units from one interface. The unit is powered by 802.3af PoE or the supplied 12 V adapter.
Limits of the 2.4 GHz 802.11n interface
The single radio operates only in the 2.412–2.472 GHz band, so it cannot use 5 GHz channels. Maximum PHY rate is 300 Mbps with two spatial streams. Receiver sensitivity reaches -61 dBm at the top 802.11n rate and -76 dBm at 11 Mbps. Modulation includes DBPSK, DQPSK, CCK, BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM.
IP30 housing with ceiling mount and Gigabit PoE
The off-white, low-profile enclosure measures 1.80" x 7.30" x 7.30" and weighs 1.01 lbs. An IP30 rating applies when the mounting plate is installed. One Gigabit LAN port accepts PoE and provides the sole wired uplink. Front-panel buttons cover reset, WPS and power. Operating range is 0°C to 40°C at up to 95 % non-condensing humidity.
Highlights
- N300 wireless speeds up to 300 Mbps for fast local traffic
- PoE Gigabit port powers the unit over a single network cable
- Software controller manages multiple access points from one Windows console
- IP30 rated housing with mounting plate simplifies ceiling or wall installation
- Supports AP, Client, WDS AP, WDS Bridge, WDS Station and Repeater modes
Specifications
| Brand | TRENDnet |
|---|---|
| Model | N300 PoE Access Point |
| Part Number | TEW-755AP |
| Standards | IEEE 802.1Q IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.11b IEEE 802.11g IEEE 802.11n (up to 300 Mbps) |
| Wireless Data Rates | Up to 300Mbps |
| Frequency Band | 2.4 GHz: 2.412 – 2.472 GHz |
| Antenna | 2.4 GHz: 2 x 4 dBi |
| Receiver Sensitivity | 802.11a: 15 dBm (typical) / -65 dBm (typical) @ 54 Mbps 802.11b: 18 dBm (typical) / -76 dBm (typical) @ 11 Mbps 802.11g: 15 dBm (typical) / -65 dBm (typical) @ 54 Mbps 802.11n: 15 dBm (typical) / -61 dBm (typical) @ 300 Mbps (for 2.4 GHz & 5 GHz) |
| Modulation | DBPSK / DQPSK / CCK for DSSS technique BPSK / QPSK / 16-QAM / 64-QAM / 256-QAM for OFDM technique |
| System Requirements | Windows 8.1, 8, 7, Vista, XP |
| Interface | 1 x PoE Gigabit LAN port |
| Buttons | Reset, WPS, Power |
| Power Supply | 12 V / 1 A consumption: 9.6 Watts Max. |
| Certifications | CE, FCC |
| Temperature | 0°C - 40°C (32°F - 104°F) |
| Humidity | 95% Maximum, Non-Condensing |
| Dimensions | 1.80" x 7.30" x 7.30" |
| Weight | 1.01 lbs. |
| Features | IP30 rated housing (with mounting plate installed) WiFi traffic shaping 802.1Q VLAN assignment per SSID IPv6 support (Link-Local, Static IPv6, Auto-Configuration (SLAAC/DHCPv6) Multi-Language interface, English, French, Spanish, German, Russian LEDs on/off Captive Portal (External Coovachilli server authentication) Internal Captive Portal (Local user account authentication and customizable portal page) 802.11k roaming assistance support RSSI Scanner (Client signal strength and tolerance) Airtime Fairness |
| Package Contents | TEW-755AP 5 ft. (1.5 m) network cable CD-ROM (Software controller and User’s Guide) Quick Installation Guide Power adapter (12 V DC, 1 A) Mounting bracket |
| Shipping weight | 0.95 kg |
| Package size | 307 × 236 × 86 mm |
Questions about this item
Which operating mode should I pick for a single access point covering a small office?
Use Access Point mode to create a 2.4 GHz wireless network at up to 300 Mbps from the Gigabit PoE LAN port.
What does the 300 Mbps wireless rate deliver in practice?
It provides an N300 2.4 GHz link with 2 x 4 dBi antennas; real throughput depends on client mix, interference and distance.
Does the Gigabit PoE port support 802.3af power input?
Yes — the single LAN port accepts 802.3af PoE, so the unit draws up to 9.6 W without a local power adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



