TRENDnet MT-VGA 2-Port USB VGA KVM Switch
A two-port USB VGA KVM switch lets two computers share one monitor, keyboard, mouse, printer and USB speaker with push-button switching and 1920 x 1440 resolution support
- TypeUSB
- PC ConnectorsFemale Vga
- Console ConnectorsFemale Vga
- Computer ConnectionsUSB 2.0
- Monitor Connections4 Ports
- PC SelectionPush Buttons
- Share one VGA monitor, keyboard and mouse between two computers
- Switch ports with front push buttons — no software needed
- Supports 1920 x 1440 resolution at 60 Hz
- USB-powered — no external power adapter required
- Includes two 1.2 m USB-VGA cables for immediate setup
Two-port USB VGA KVM switch
The TRENDnet MT-VGA is a 2-port KVM switch that lets two computers share one VGA monitor, a USB keyboard and a USB mouse. It includes two built-in 1.2 m USB VGA cables and draws power from the USB connections so no external power supply is needed. A push-button on the unit selects the active computer.
Suited for dual-PC desks without extra power
This switch suits users who need to control two legacy or office systems from a single VGA console and prefer a cable-powered device. It does not support mechanical keyboards or mice, and it cannot be used with a docking station. Buyers who need audio switching over a 3.5 mm jack or who want hot-key switching should look elsewhere.
Maximum supported resolution 1920 x 1440 at 60 Hz
The single specification that decides fit is the video ceiling of 1920 x 1440 at 60 Hz with DDC support. If the connected monitor or source requires a higher resolution or refresh rate, this switch will not pass the signal correctly.
Highlights
- Share one VGA monitor, keyboard and mouse between two computers
- Switch ports with front push buttons — no software needed
- Supports 1920 x 1440 resolution at 60 Hz
- USB-powered — no external power adapter required
- Includes two 1.2 m USB-VGA cables for immediate setup
Specifications
| Brand | TRENDnet |
|---|---|
| Model | MT-VGA |
| Part Number | MT-VGA |
| Type | USB |
| PC Connectors | Female Vga |
| Console Connectors | Female Vga |
| Computer Connections | USB 2.0 |
| Monitor Connections | 4 Ports |
| PC Selection | Push Buttons |
| Monitors Supported | VGA DDC, DDC2, DDC2B |
| Audio Features | Offers audio and microphone switching |
| Power Features | Requires no additional power supply |
| USB Features | with USB support |
| SplitterOnly | VGA Monitor Splitter only |
| Application | Female Vga, Usb, push_button |
| Features | Female Vga, Usb, push_button, 2, IP56, Push Button |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Package Contents | with Built-in Cables |
Questions about this item
How do I connect the 1.2 m USB-VGA cables so the 1920 x 1440@60 Hz signal appears on the monitor?
Plug each cable's VGA-plus-USB pigtail into the computer's VGA and USB ports, then connect the VGA ends to the switch; the USB link powers the unit and carries keyboard, mouse and USB speaker data.
Which parts will need replacement if I use this switch daily for years?
The captive 1.2 m USB-VGA cables and the front push buttons are the only moving or flexing components; no internal fan, battery or user-serviceable module is present.
What is the first limitation I hit when running two PCs at 1920 x 1440@60 Hz continuously?
The single VGA console port and DDC2B handshake mean only one computer drives the monitor at a time; bandwidth does not increase by leaving both systems powered on.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



