TRENDnet KS202V 2 Port VGA KVM Switch
A 2-port VGA KVM switch lets two computers share one monitor and three USB 2.0 devices with push-button switching and 1920 x 1440 resolution
- TypeUSB
- PC ConnectorsUsb
- Console ConnectorsUsb
- Computer ConnectionsUSB 2.0
- Monitor Connections4 Ports
- PC SelectionPush Buttons
- Control two PCs from one VGA monitor and three USB 2.0 peripherals
- Supports up to 1920 x 1440 resolution for clear display output
- Plug-and-play operation with no driver installation required
- Push-button switching via wired desktop controller for instant PC selection
- Includes two integrated VGA and USB 2.0 KVM cables for tidy setup
Two-PC VGA KVM Switch
The TRENDnet KS202V lets two computers share one VGA monitor and three USB 2.0 peripherals such as a keyboard, mouse and printer. It is aimed at office desks, classrooms or test benches where a single console must control multiple systems. The switch includes two integrated KVM cables that combine VGA and USB into one tidy run per computer. No drivers are required for any supported operating system.
Push-Button Switching and Included Cables
A wired desktop controller provides physical push buttons for instant PC selection without software hotkeys. Each of the two attached cables carries both video and USB signals, reducing cable clutter behind the desk. The metal enclosure carries an IP54 rating for dust and splash resistance in demanding environments. Audio and microphone switching is also supported for multimedia setups.
Check Video Outputs and Peripheral Count
Verify that both source computers have VGA video outputs before ordering. Confirm that three USB 2.0 ports are sufficient for the console devices you plan to connect. The unit supports resolutions up to 1920 by 1440, so ensure your monitor and graphics cards can operate at or below that level. No external power supply is mentioned in the specifications.
Highlights
- Control two PCs from one VGA monitor and three USB 2.0 peripherals
- Supports up to 1920 x 1440 resolution for clear display output
- Plug-and-play operation with no driver installation required
- Push-button switching via wired desktop controller for instant PC selection
- Includes two integrated VGA and USB 2.0 KVM cables for tidy setup
Specifications
| Brand | TRENDnet |
|---|---|
| Series | 2 Port VGA KVM |
| Model | KS202V |
| Part Number | KS202V |
| Type | USB |
| PC Connectors | Usb |
| Console Connectors | Usb |
| Computer Connections | USB 2.0 |
| Monitor Connections | 4 Ports |
| PC Selection | Push Buttons |
| Monitors Supported | VGA DDC, DDC2, DDC2B |
| Audio Features | Offers audio and microphone switching |
| USB Features | with USB support |
| SplitterOnly | VGA Monitor Splitter only |
| Application | Usb |
| Features | Usb, 2, IP54 |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
Questions about this item
What video standard does the KS202V use, and what resolution does it cap at?
It uses VGA with DDC, DDC2 and DDC2B support and caps at 1920 x 1440.
What physical space and cabling does the unit need to fit on a desk?
The box measures 14.33 in wide, 12.83 in high and 9.06 in deep, and ships with two integrated VGA-and-USB KVM cables.
How do I install it, and what step do people often miss?
Connect each PC with its supplied VGA-and-USB cable, plug the monitor and up to three USB 2.0 peripherals into the console ports, then press the wired desktop controller button to switch — no driver install is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation 4K60 HDMI Dual-Head KVM Switch 4 Port
$774.99
0.00906867BTC
In stock