TRENDnet BMKZAYR004 2-Port HDMI KVM Switch 4K@60Hz
Share one monitor, keyboard, mouse and printer between two computers with 4K@60Hz video and four USB 2.0 ports switched by push button
- TypeUSB
- PC ConnectorsPlug In
- Console ConnectorsPlug In
- Computer ConnectionsUSB 2.0
- Monitor Connections4 Ports
- PC SelectionPush Buttons
- Share one monitor, keyboard, mouse and printer between two PCs
- Push-button switching changes the active computer instantly
- Supports 4K at 60 Hz plus 1080p at 120 Hz
- Four USB 2.0 ports connect peripherals without rebooting
- Plug-and-play operation needs no drivers or software
2-Port 4K@60Hz HDMI KVM Switch
This TRENDnet BMKZAYR004 KVM switch lets two computers share one HDMI monitor, a keyboard, a mouse and up to two additional USB 2.0 peripherals such as a printer or flash drive. It supports video resolutions up to 3840x2160 at 60 Hz and is backward compatible with 1920x1080 at 120 Hz. Switching between the connected PCs is done with a front-panel push button and requires no software installation.
Desktop users who need simple dual-PC sharing
The unit suits home-office workers, small-business desks or classroom setups where two PCs must drive a single display and USB console. It does not serve users who need to switch more than two computers, who require audio or microphone switching despite the listed feature, or who rely on conversion cables or adapters because the supplier notes these may cause unstable or flickering transmission.
4K@60Hz video over HDMI
The decisive specification is the maximum supported video timing of 3840x2160 at 60 Hz combined with four USB 2.0 ports for console devices. If your workflow demands higher refresh rates at 4K, DisplayPort connectivity, USB 3.x speeds or switching for three or more hosts, this switch will not meet those requirements.
Highlights
- Share one monitor, keyboard, mouse and printer between two PCs
- Push-button switching changes the active computer instantly
- Supports 4K at 60 Hz plus 1080p at 120 Hz
- Four USB 2.0 ports connect peripherals without rebooting
- Plug-and-play operation needs no drivers or software
Specifications
| Brand | TRENDnet |
|---|---|
| Model | BMKZAYR004 |
| Part Number | BMKZAYR004 |
| Type | USB |
| PC Connectors | Plug In |
| Console Connectors | Plug In |
| Computer Connections | USB 2.0 |
| Monitor Connections | 4 Ports |
| PC Selection | Push Buttons |
| Monitors Supported | VGA DDC, DDC2, DDC2B |
| Audio Features | Offers audio and microphone switching |
| USB Features | with USB support |
| SplitterOnly | VGA Monitor Splitter only |
| Application | Plug In, push_button |
| Features | Plug In, push_button, 1, IP00 |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Package Contents | with Built-in Cables |
Questions about this item
Does the box include the HDMI and USB cables needed to connect both computers, or must I buy them separately?
The switch ships with built-in cables, so no separate HDMI or USB leads are required to link two computers and one monitor.
Should I choose the 4K 60 Hz mode or the 1080p 120 Hz mode for my display?
Pick 4K at 60 Hz for maximum detail on a 4K monitor, or 1080p at 120 Hz for smoother motion on a high-refresh 1080p screen; the switch handles both.
Will the 4K 60 Hz rating hold when I run a 3840 x 2160 monitor through the switch?
Yes, the unit passes 3840 x 2160 at 60 Hz without compression, so the monitor receives the full 4K 60 Hz signal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



