TREADALT-TEC RP-SMA Male Right Angle Dual Band WiFi 6 Antenna 2.4 5.8 GHz 3dBi 2pcs
Dual-band 2.4 GHz and 5.8 GHz omnidirectional antennas with 3 dBi gain and RP-SMA right-angle connectors for WiFi 6 devices
- TypeRadio
- Colorsilver,
- SpecificationsRadio
- FeaturesRadio
- Dual-band 2.4 GHz and 5.8 GHz coverage
- 3 dBi gain extends wireless range
- Omnidirectional pattern receives signals from all sides
- RP-SMA male right-angle plug fits tight spaces
- Supports WiFi 6 802.11 ax standard
Dual-Band RP-SMA Antenna Pair
This two-piece antenna set connects to any RP-SMA male port and covers the 2.4 GHz and 5.8 GHz bands used by WiFi 6 devices. The 3 dBi omnidirectional gain is designed for routers, PCIe cards, USB adapters and FPV video links that need a compact right-angle form factor.
Upgrade from Fixed or Lower-Gain Whips
Replace stubby fixed antennas or older 2 dBi models when signal must reach through walls or across a workshop; the jump is worth it when the host device already supports 802.11 b/g/n/ac/ax and the connector matches RP-SMA male.
Build Integration and Clearance
The right-angle hinge lets the whip sit parallel to a motherboard I/O shield or router chassis, saving vertical space in tight enclosures. Each antenna presents a 50 ohm load and requires no extra cabling, power or driver support beyond the host radio’s existing WiFi 6 stack.
Highlights
- Dual-band 2.4 GHz and 5.8 GHz coverage
- 3 dBi gain extends wireless range
- Omnidirectional pattern receives signals from all sides
- RP-SMA male right-angle plug fits tight spaces
- Supports WiFi 6 802.11 ax standard
Specifications
| Brand | TREADALT-TEC |
|---|---|
| Model | RP-SMA Male Right Angle |
| Part Number | RP-SMA Male Right Angle |
| Type | Radio |
| Color | silver, |
| Specifications | Radio |
| Features | Radio |
Questions about this item
What connector does the RP-SMA Male Right Angle antenna use to attach?
Each antenna has an RP-SMA male connector that threads into a matching RP-SMA female jack on your router, PCIe card or USB adapter.
How do I install the dual-band antennas and what step is often missed?
Screw each antenna onto its RP-SMA port by hand until snug, then rotate the right-angle hinge so the whip points vertically for best omnidirectional coverage.
When should I replace these 3 dBi omnidirectional antennas?
Replace them if the RP-SMA threads are damaged, the whip is bent or cracked, or signal drops noticeably on 2.4 GHz and 5 GHz bands.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
