We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with LC duplex port and metallic finish

Transition Networks

Transition Networks TN-SFP-GE-L 1000BASE-LX SFP Transceiver

SKU CH-S1FF-J29R0

Single-mode SFP transceiver with LC connector delivers 1 Gbps over 10 km at 1310 nm wavelength

  • Device TypeTransceiver
  • Wavelength1310nm
  • Fiber CableSMF
  • PortsLC
  • Max Distance10Km
  • Transfer Rate1 Gbps
  • 1 Gbps transfer rate for fast network links
  • 1310 nm wavelength on single-mode fiber
  • LC duplex connector fits standard SFP ports
  • 10 km reach extends campus or metro runs
  • 3 V low-power operation reduces system draw

1000BASE-LX SFP Transceiver

The Transition Networks TN-SFP-GE-L is a small form-factor pluggable transceiver built for single-mode fibre networks. It delivers a 1 Gbps transfer rate over a 1310 nm wavelength with an LC duplex connector. The module is suited for network administrators extending Gigabit Ethernet or fibre channel links up to 10 km.

Replaces copper uplinks or shorter-reach optics

This transceiver upgrades connections that currently run over copper or multi-mode fibre when distance exceeds their practical limit. The jump is worth it when a link must span up to 10 km without signal regeneration. It is not for buyers who need multi-mode compatibility or reaches beyond the specified single-mode distance.

Hot-pluggable SFP installation

The module installs into any standard SFP port without powering down the host switch or router. It operates at 3.3 V and weighs 0.15 units for lightweight handling. The most common issue is mismatching the LC connector polarity or using multi-mode patch cords instead of the required single-mode fibre.

Highlights

  • 1 Gbps transfer rate for fast network links
  • 1310 nm wavelength on single-mode fiber
  • LC duplex connector fits standard SFP ports
  • 10 km reach extends campus or metro runs
  • 3 V low-power operation reduces system draw

Specifications

BrandTRANSITION
ModelTN-SFP-GE-L
Device TypeTransceiver
Wavelength1310nm
Fiber CableSMF
PortsLC
Max Distance10Km
Transfer Rate1 Gbps
Feature1000BASE-LX 1310nm single mode (LC) [10 km/6.2 mi.]
Weight0.15
Shipping weight0.05 kg
Package size152 × 83 × 44 mm

Questions about this item

Does the LC duplex connector on this transceiver fit a standard SFP cage without an adapter?

Yes, the TN-SFP-GE-L uses an industry-standard LC duplex interface that plugs directly into any compliant SFP port.

What is the correct insertion sequence to avoid damaging the 1310 nm optical interface?

Insert the module into the SFP cage until it clicks, then connect the LC patch cable; never connect cables before the module is fully seated.

When should the optical interfaces be cleaned to maintain the 10 km link budget?

Clean both the transceiver LC ports and the patch-cord ferrules with a lint-free swab and isopropyl alcohol before first installation and whenever signal loss is detected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.