We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transition Networks PoE+ fiber media converter in metal enclosure with RJ45 and LC ports

Transition Networks

Transition Networks SGPAT1039105FNA PoE+ Fiber Media Converter

SKU CH-2VRC-PY3DT MPN SGPAT1039105FNA

Converts Ethernet to multi-mode fibre at 10/100/1000 Mb/s with PoE+ power over RJ-45 up to 1800 ft at 850 nm

  • Compatible BrandTransition Networks
  • PoE+ powers devices over Ethernet cable
  • Gigabit speeds on copper and fibre links
  • Multi-mode LC fibre reaches 1800 ft at 850 nm
  • RJ-45 and LC connectors for flexible cabling
  • Stand-alone converter needs no chassis

Stand-Alone PoE+ Fiber Media Converter

This Transition Networks SGPAT1039105FNA is a stand-alone Power over Ethernet PSE fiber media converter designed for network infrastructure. It converts electrical Gigabit Ethernet signals to optical multi-mode fiber signals while supplying PoE+ power to connected devices such as wireless access points or IP cameras. The unit operates as a self-contained converter for extending network reach.

Network installers needing powered fiber links

Installers who need to deliver both data and PoE+ power over multi-mode fiber up to 1800 ft at 850 nm will find this converter suitable. It supports 10/100/1000Base-T on the copper RJ-45 side and 1000Base-SX/100Base-FX on the fiber LC side. Buyers requiring single-mode fiber distances, managed converter features, or non-PoE fiber links should consider other solutions.

PoE+ PSE function over multi-mode fiber

The defining specification is the integrated PoE+ Power Sourcing Equipment function combined with multi-mode fiber conversion at 850 nm wavelength. This allows a single device to extend a Gigabit Ethernet segment beyond copper distance limits while powering a remote PoE-compliant endpoint without a local power source.

Highlights

  • PoE+ powers devices over Ethernet cable
  • Gigabit speeds on copper and fibre links
  • Multi-mode LC fibre reaches 1800 ft at 850 nm
  • RJ-45 and LC connectors for flexible cabling
  • Stand-alone converter needs no chassis

Specifications

Compatible BrandTransition Networks
Shipping weight1.36 kg
Package size274 × 242 × 82 mm

Questions about this item

What LC multi-mode fiber distance does the 850 nm link support?

The converter handles multi-mode fiber runs up to 1800 ft at 850 nm.

Which RJ-45 port standards are required for the copper side?

Connect 10Base-T, 100Base-TX or 1000Base-T copper cables to the RJ-45 port.

When should the LC multi-mode connectors be cleaned or replaced?

Clean LC ferrules whenever signal loss appears; replace patch cords if end-face damage is visible.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.