We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black desktop media converter with RJ-45 and SC fiber ports

Transition Networks

Transition Networks SGFEB1013-130-NA SFP transceiver

SKU CH-1F3F-BJBC4 MPN SGFEB1013-130-NA

Ethernet media converter bridging copper and multi-mode fiber with auto-negotiation and link pass-through

  • Device TypeTransceiver
  • FeatureSold as 1 Each.
  • Weight1.35
  • Auto-negotiation optimises link speed automatically
  • AutoCross detects MDI/MDI-X without manual cables
  • Link pass-through propagates fault state to remote end
  • Far-end and remote fault detection speeds troubleshooting
  • Rate conversion extends reach over multi-mode fiber up to 721.78 ft

Media converter for copper-to-fiber extension

The Transition Networks SGFEB1013-130-NA converts 10/100/1000Base-T copper signals to 1000Base-SX/LX multi-mode fiber. It is built for network technicians who need to extend a gigabit link beyond the copper distance limit. The desktop, rack-mountable or rail-mountable form factor suits wiring closets and equipment racks.

AutoCross and Link Pass Through simplify

AutoCross detects MDI or MDI-X on the RJ-45 port automatically, removing the need for crossover cables. Link Pass Through monitors loss of signal on both the fiber and copper ports and propagates the link state so upstream equipment can react to a break. Far-end fault and remote fault detection add further visibility for troubleshooting.

721.78-foot reach on 850 nm multi-mode fiber

The single SC female port operates at 850 nm and supports 50/125 µm and 62.5/125 µm fiber cores up to 721.78 feet. If the link must span a longer distance or use single-mode fiber, this unit will not meet the requirement. Power draw is 2.2 W.

Highlights

  • Auto-negotiation optimises link speed automatically
  • AutoCross detects MDI/MDI-X without manual cables
  • Link pass-through propagates fault state to remote end
  • Far-end and remote fault detection speeds troubleshooting
  • Rate conversion extends reach over multi-mode fiber up to 721.78 ft

Specifications

BrandTransition Networks
Device TypeTransceiver
FeatureSold as 1 Each.
Weight1.35
Shipping weight0.91 kg
Package size305 × 229 × 102 mm

Questions about this item

How often does the SFP transceiver itself need to be replaced under normal operation?

The transceiver is a solid-state module with no moving parts and no consumable components, so it does not require scheduled replacement.

What is the maximum link distance before signal loss limits sustained use?

The operating distance is 721.78 feet over 50/125 µm or 62.5/125 µm multi-mode fiber at 850 nm wavelength.

How much heat and power does the unit draw when running continuously?

Power consumption is 2.2 W, and the desktop or rack-mountable enclosure relies on passive cooling with no fan.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.