We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver transceiver with RJ-45 and SC ports

Transition Networks

Transition Networks M/E-PSW-FX-02(SC)-NA SFP transceiver 10/100Base-TX 100Base-FX SC RJ-45 1.24 Mile

SKU CH-RR00-ZZPS8 MPN M/E-PSW-FX-02(SC)-NA

A media converter linking 10/100Base-TX copper to 100Base-FX fibre over 1.24 miles via SC and RJ-45 ports

  • Device TypeOther
  • Ports1 x RJ-45 Network 1 x SC Network
  • Max Distance1.24 Mile
  • FeatureNetwork Technology:10/100Base-TX 100Base-FX
  • Dimensions0.9' Height x 1.8' Width x 3.3' Depth
  • Weight0.74
  • Connect 10 Mbps devices to 100 Mbps networks
  • Full-duplex fiber link removes collision domains
  • Miniature 0.9 x 1.8 x 3.3 inch form factor saves rack space
  • Lightweight 0.74 lb module simplifies installation
  • SC and RJ-45 ports support 1.24 mile fiber reach

Media Converter for Legacy Networks

The Transition Networks M/E-PSW-FX-02(SC)-NA converts a 10/100Base-TX copper link to a 100Base-FX fiber connection using an SC interface. It extends network segments up to 1.24 mile while isolating collision domains between half-duplex hubs. The compact unit measures 0.9 height by 1.8 width by 3.3 depth inches and weighs 0.74 lb.

Simple Installation With One Constraint

The converter uses a single RJ-45 port for copper and one SC port for fiber, so cabling is straightforward for technicians familiar with 100 Mbps infrastructure. No software configuration is required, but the fixed 100 Mbps fiber speed means it cannot auto-negotiate to gigabit rates. Ensure the far-end equipment also uses 100Base-FX optics to avoid link failures.

Ideal for Extending Older Ethernet Segments

This suits integrators maintaining legacy 10/100 networks who need fiber reach beyond copper limits without replacing core switches. It is not for builders who need gigabit or multi-gigabit throughput, deployments requiring SFP modularity, or links exceeding the stated 1.24 mile distance.

Highlights

  • Connect 10 Mbps devices to 100 Mbps networks
  • Full-duplex fiber link removes collision domains
  • Miniature 0.9 x 1.8 x 3.3 inch form factor saves rack space
  • Lightweight 0.74 lb module simplifies installation
  • SC and RJ-45 ports support 1.24 mile fiber reach

Specifications

BrandTRANSITION
ModelM/E-PSW-FX-02(SC)
Device TypeOther
Ports1 x RJ-45 Network
1 x SC Network
Max Distance1.24 Mile
FeatureNetwork Technology:10/100Base-TX
100Base-FX
Dimensions0.9' Height x 1.8' Width x 3.3' Depth
Weight0.74
Package ContentsNG0292
Shipping weight0.91 kg
Package size84 × 46 × 23 mm

Questions about this item

How do I confirm the link is running at 100Base-FX over the SC fiber after connecting the transceiver?

Check the switch or media-converter port LEDs for a solid 100 Mbps link light and verify the reported speed in the management interface shows 100Base-FX full duplex.

What comes in the package and what else is needed to complete the copper-to-fiber link?

The box contains the NG0292 transceiver with one RJ-45 and one SC port; you must supply a duplex SC fiber patch cable and a Cat5e or better UTP patch cord.

Which version should I choose if my fiber run is roughly 1.24 Mile?

The M/E-PSW-FX-02(SC)-NA is rated for 1.24 Mile on multimode fiber, matching that distance exactly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.