We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transition Networks C4110-4848 fiber repeater unit

Transition Networks

Transition Networks C4110-4848 Backup Media

SKU CH-Z7WY-HTKHT

Multi-rate fiber-to-fiber repeater supports Gigabit Ethernet, SONET/SDH, 10 Gigabit Ethernet, Fibre Channel, 2Gb and 4Gb Fibre Channel

  • Protocol-independent fibre repeater extends links without signal conversion
  • Multi-rate support handles Gigabit, 10 Gigabit and Fibre Channel on one unit
  • Transparent operation preserves original framing and timing across the connection
  • New condition ensures full manufacturer specification from first deployment
  • Model C4110-4848 identifies the exact hardware for spares and documentation

Protocol-Independent Fiber Repeater

The Transition Networks C4110-4848 is a protocol-independent fiber-to-fiber repeater built for network infrastructure. It extends fiber links across single-mode or multi-mode cables without converting the signal protocol. Network engineers use it to bridge long-haul campus runs, metro rings or data-centre interconnects where signal regeneration is required.

Suited for Transparent Link Extension

This unit suits teams that need transparent regeneration for Gigabit Ethernet, Sonet/SDH, 10 Gigabit Ethernet, Fibre Channel, 2Gb and 4Gb Fibre Channel signals on a single device. It does not suit buyers who need copper connectivity, wavelength conversion, managed switching features or protocol translation between dissimilar standards.

Multi-Rate Protocol Transparency

The single specification that decides fit is multi-rate protocol transparency across the listed Ethernet, Sonet/SDH and Fibre Channel standards. If the link carries any of those protocols at line rate, the repeater regenerates the optical signal without re-clocking or frame inspection. If the traffic uses a different protocol or requires wavelength translation, this is not the correct part.

Highlights

  • Protocol-independent fibre repeater extends links without signal conversion
  • Multi-rate support handles Gigabit, 10 Gigabit and Fibre Channel on one unit
  • Transparent operation preserves original framing and timing across the connection
  • New condition ensures full manufacturer specification from first deployment
  • Model C4110-4848 identifies the exact hardware for spares and documentation

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the C4110-4848 fiber repeater and which step is often missed?

Mount the unit in a rack or shelf, connect the two fiber links to the matching ports, and apply power; the step most often missed is confirming both links use identical wavelengths and distance ratings before powering on.

What maintenance or replacement will the C4110-4848 need over time?

Plan to inspect and clean the fiber connectors periodically; the only field-replaceable items are the SFP transceivers if a link budget degrades or a port fails.

What limit appears first on the C4110-4848 during sustained high-throughput use?

The protocol-independent repeater forwards line-rate traffic up to 10 Gigabit Ethernet speeds, so the first limit encountered is the fixed bandwidth of the installed SFP modules.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.