Traditions (Generic)
Traditions (Generic) xTool S1 40W Rotary Bundle laser engraver
A 40W diode laser cuts 18mm wood and engraves at 600mm/s on a 23.93" x 15.16" bed with auto-focus and a rotary bundle for tumblers
- Engrave large projects on a 23.93" x 15.16" bed
- Cut 18 mm cherry wood in one pass with 40 W power
- Reach 600 mm/s engraving speed for high throughput
- Auto-focus and pre-tested settings for over 400 materials simplify use
- Rotary attachment included for tumblers and curved objects
40 W Diode Laser Engraver
The xTool S1 40W is a desktop diode laser cutter and engraver that delivers a 40 W optical output. It is built for makers, small workshops and hobbyists who need a single machine for cutting and engraving wood, acrylic, metal and other common materials.
600 mm/s Speed with 23.93" x 15.16" Bed
The engraver reaches engraving speeds of 600 mm/s across a 23.93 by 15.16 inch working area. Auto-focus and the included xTool Creative Space software with over 400 pre-tested material settings reduce setup time, while the rotary bundle adds the ability to engrave cylindrical objects such as tumblers.
18 mm Wood Cutting and 118 Inch Passthrough
A single pass cuts through 18 mm cherry wood, and AutoPassthrough technology extends the effective engraving length to 118 inches for oversized projects. The 0.08 by 0.1 mm laser spot limits detail on very fine artwork, and the diode wavelength restricts marking on certain metals without a coating.
Highlights
- Engrave large projects on a 23.93" x 15.16" bed
- Cut 18 mm cherry wood in one pass with 40 W power
- Reach 600 mm/s engraving speed for high throughput
- Auto-focus and pre-tested settings for over 400 materials simplify use
- Rotary attachment included for tumblers and curved objects
Specifications
No published specifications for this item yet.
Questions about this item
How thick a material can the 40W laser cut in one pass?
The 40W diode laser cuts 18mm cherry wood in a single pass, which is the thickest material figure supplied for this machine.
What are the noise, heat or power figures for all-day operation?
No noise level, heat output or power-draw numbers are provided for continuous use.
What rotary accessory is included in the Rotary Bundle for tumblers?
The bundle includes a rotary attachment for engraving cylindrical objects such as tumblers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
