We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 16-pin OBD-II plug to right-angle Micro USB cable, seven feet long

TRACKI

TRACKI OBD to Micro USB Cable 7ft 12V 24V

SKU CH-VMYD-WYQ5S

A 7-foot OBD2-to-Micro-USB cable converts 12 V or 24 V vehicle power with 88–98 % efficiency and protects connected devices with over-current, over-voltage and low-voltage safeguards

  • TypeGPS Chargers & Cables
  • Powers devices from the vehicle OBD-II port via 16-pin connector
  • 7-foot cable reaches dash-mounted gear without tension
  • 95 to 98 percent efficiency at 12 V input saves battery
  • 6 A overcurrent and 5.6 V overvoltage safeguards protect connected hardware
  • 5 V low-voltage cut-off prevents starter-battery drain

Power input and voltage range

This cable plugs into a standard 16-pin OBD-II port and accepts 12 V or 24 V vehicle systems. An internal stabiliser converts the supply with 95 to 98 percent efficiency at 12 V and 88 to 90 percent at 24 V. The right-angle Micro USB connector keeps the lead tidy against the dash. It delivers regulated 5 V power to any Micro USB device.

Suitable uses and limits

Drivers who want a permanent, fuse-panel-free feed for a dashcam, GPS navigator, phone or tablet will find the seven-foot reach convenient. Built-in protection limits current to 1.6 A, clamps output at 5.6 V and cuts off if the battery drops to 11.5 V, preventing flat-battery starts. It cannot charge devices that need more than 2 A or require USB-C, Lightning or proprietary connectors.

Installation and vehicle integration

The male OBD-II plug inserts directly into the diagnostic socket with no tools or splicing. The two-metre cable routes along trim panels to the windscreen or centre console, leaving the port accessible for diagnostics. Low-voltage shutdown protects the starter battery on long parking periods. The adapter adds no extra load to the vehicle’s fuse box and frees the 12 V accessory socket for other gear.

Highlights

  • Powers devices from the vehicle OBD-II port via 16-pin connector
  • 7-foot cable reaches dash-mounted gear without tension
  • 95 to 98 percent efficiency at 12 V input saves battery
  • 6 A overcurrent and 5.6 V overvoltage safeguards protect connected hardware
  • 5 V low-voltage cut-off prevents starter-battery drain

Specifications

TypeGPS Chargers & Cables

Questions about this item

What does the vehicle need for this OBD-II cable to supply power?

The vehicle must provide a 12 V or 24 V supply through its 16-pin OBD-II port.

Will the low-voltage cut-off protect an older car battery from deep discharge?

Yes, the cable stops drawing power when the battery drops to 11.5 V, preventing excessive drain.

How can I confirm the cable is regulating voltage correctly after plugging it in?

A connected Micro-USB device should charge steadily without triggering over-current or over-voltage protection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.