TP-Link
TP-Link TL-WR840N 300Mbps Wireless N Router
A 300 Mbps wireless N router with four 10/100 LAN ports, one WAN port, two external antennas and four operating modes
- 300 Mbps wireless speed for bandwidth-sensitive tasks and basic work
- Four operating modes: router, range extender, access point and WISP
- Parental controls manage when and how connected devices access the Internet
- One 10/100 Mbps WAN port plus four 10/100 Mbps LAN ports for wired connections
- Two external antennas on 2.4 GHz band with 802.11b/g/n support
TP-Link TL-WR840N 300 Mbps Router
The TP-Link TL-WR840N is a 300 Mbps Wireless N router operating on the 2.4 GHz band. It supports the 802.11b/g/n standards and provides one 10/100M WAN port plus four 10/100M LAN ports. Two external antennas help extend wireless coverage for basic home or small office networking tasks.
Suitable for basic wireless needs.
This router suits users who need simple wireless connectivity for web browsing, email and standard definition streaming on the 2.4 GHz frequency. It also functions as a range extender, access point or WISP client. Buyers who require faster wireless throughput, dual-band capability or gigabit Ethernet ports should look at other models.
300 Mbps maximum wireless rate
The single specification that determines suitability is the 300 Mbps maximum wireless transmission rate on the 2.4 GHz band. This throughput ceiling defines the performance available for bandwidth-sensitive tasks and basic work. If your network demand exceeds this limit, a higher-rated router will be necessary.
Highlights
- 300 Mbps wireless speed for bandwidth-sensitive tasks and basic work
- Four operating modes: router, range extender, access point and WISP
- Parental controls manage when and how connected devices access the Internet
- One 10/100 Mbps WAN port plus four 10/100 Mbps LAN ports for wired connections
- Two external antennas on 2.4 GHz band with 802.11b/g/n support
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the TL-WR840N draw when running continuously?
The router uses a low-power Broadcom chipset with 2T2R 2.4 GHz radios and 10/100 Mbps ports, so its consumption stays modest even under full load.
What cabling do I need to connect the TL-WR840N to my modem and wired devices?
You need standard Ethernet cables for the 10/100 Mbps WAN port and the four 10/100 Mbps LAN ports; no special cabling is required.
Will the TL-WR840N work with my older 802.11b/g laptops?
Yes, the router supports 802.11b/g/n on 2.4 GHz, so legacy Wi-Fi devices connect at their maximum supported rates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



