We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TP-Link

TP-Link TL-SM331T 1 Gbps RJ45 SFP transceiver 100m

SKU CH-TDR3-VNMR9 MPN TL-SM331T

A copper SFP module adds a 1 Gbps RJ45 port to SFP equipment with a 100 m reach over Cat 5e cabling

  • Device TypeTransceiver
  • StandardsIEEE 802.3-2002
  • Ports1 x 1000 Mbps RJ45 Port
  • Max Distance100m (Cat 5e or above)
  • Transfer Rate1 Gbps
  • TemperatureOperating Temperature: 0 - 70 °C (32 - 158 °F) Storage Tempe
  • Connect copper links up to 100 metres via SFP ports
  • Plug and play deployment with no software or configuration needed
  • Hot-pluggable design allows module changes without network shutdown
  • Durable metal casing protects the module in demanding environments
  • Operates reliably from 0 to 70 °C for indoor installations

Copper SFP for gigabit switches

The TP-Link TL-SM331T is a 1 Gbps RJ45 SFP transceiver that adds a copper Ethernet port to any device with an SFP slot. It targets network administrators who need to extend a fibre switch or media converter to a Cat 5e or better copper run up to 100 metres. The module follows the IEEE 802.3-2002 standard and requires no software configuration.

Passive thermal range and hot-plug operation

The transceiver operates from 0 to 70 °C and survives storage from -40 to 85 °C without active cooling. A durable metal casing dissipates heat passively, so the unit adds no fan noise to the rack. Hot-pluggable design lets technicians insert or remove the module while the host equipment stays powered, avoiding downtime during maintenance.

SFP slot compatibility and cabling freedom

The module fits any standard SFP port on switches, routers or media converters, freeing the builder from dedicated copper uplinks. It accepts a single RJ45 patch cord up to 100 metres on Cat 5e or above, removing the need for fibre patch cables on short links. The package includes the transceiver and an installation guide.

Highlights

  • Connect copper links up to 100 metres via SFP ports
  • Plug and play deployment with no software or configuration needed
  • Hot-pluggable design allows module changes without network shutdown
  • Durable metal casing protects the module in demanding environments
  • Operates reliably from 0 to 70 °C for indoor installations

Specifications

BrandTP-Link
ModelTL-SM331T
Device TypeTransceiver
StandardsIEEE 802.3-2002
Ports1 x 1000 Mbps RJ45 Port
Max Distance100m (Cat 5e or above)
Transfer Rate1 Gbps
TemperatureOperating Temperature: 0 - 70 °C (32 - 158 °F)
Storage Temperature: -40 - 85 °C (-40 - 185 °F)
Package Contents1000BASE-T RJ45 SFP Module TL-SM331T
Installation Guide
Shipping weight0.09 kg
Package size152 × 102 × 51 mm

Questions about this item

How do I install the TL-SM331T into an SFP port and what step do people often miss?

Slide the module into the SFP slot until it clicks, then insert a Cat 5e or better RJ45 cable up to 100 m. The step often missed is confirming the host device supports 1000BASE-T copper SFPs before purchase.

What maintenance or replacement will the TL-SM331T need over time?

No scheduled maintenance is required. Keep the RJ45 port free of dust and ensure the operating temperature stays within 0 to 70 °C. Replace the module only if link errors appear or the metal casing is damaged.

What limit appears first when the TL-SM331T runs continuously under load?

The 100 m distance limit over Cat 5e or above cabling is the first constraint. The module also must remain within the 0 to 70 °C operating range, so sustained high ambient heat can become the limiting factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.