We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal desktop switch with eleven front ports and indicator lights

TP-Link

TP-Link TL-SL1311MP 8-port 10/100 PoE+ network switch with 2 Gigabit uplink and 1 SFP port

SKU CH-4X5X-WWQJB MPN TL-SL1311MP

An unmanaged desktop switch with eight 10/100 Mbps PoE+ ports, two Gigabit RJ45 uplinks and one SFP slot, delivering up to 30 W per port within a 124 W budget

  • FormatDesktop
  • Network Management TypeUnmanaged
  • Primary Ports8x 10/100 Mbps 802.3af/at PoE+ Ports, 2x Gigabit RJ45 Ports,
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table2K
  • Switching MethodStore and Forward
  • 8 PoE+ ports deliver up to 30 W each for cameras and APs
  • 124 W total PoE budget powers multiple devices from one switch
  • Extend mode pushes data and power up to 250 m for distant cameras
  • Isolation mode blocks broadcast storms to keep the LAN stable
  • Plug-and-play unmanaged design needs no software or configuration

Eight-port PoE+ switch for IP cameras

The TL-SL1311MP is an unmanaged desktop switch with eight 10/100 Mbps PoE+ ports, two Gigabit RJ45 uplinks and one Gigabit SFP slot. It delivers up to 30 W per port within a 124 W total budget, powering IEEE 802.3af/at devices such as IP cameras, wireless access points or VoIP phones over a single cable. No configuration software is required.

Plug-and-play setup with two range-extending modes

Installation is limited to connecting the external 53.5 VDC 2.43 A adapter and patch cables; the switch auto-negotiates speed and detects powered devices automatically. Extend Mode pushes data and power to 250 m at 10 Mbps for long camera runs, while Isolation Mode suppresses broadcast storms between ports. Priority-based overload protection cuts power from the lowest-priority port first when the 124 W budget is exceeded.

124 W PoE budget across eight 10/100 ports

The switch comfortably handles multiple cameras or access points drawing up to 30 W each until the 124 W limit is reached, at which point port priority (port 1 through port 8) determines which devices stay powered. Maximum system draw is 140.92 W with full PoE load. Gigabit uplinks and the SFP slot provide 1000 Mbps backbone links, but the eight PoE ports remain fixed at 10/100 Mbps, so high-bandwidth endpoints will be constrained.

Highlights

  • 8 PoE+ ports deliver up to 30 W each for cameras and APs
  • 124 W total PoE budget powers multiple devices from one switch
  • Extend mode pushes data and power up to 250 m for distant cameras
  • Isolation mode blocks broadcast storms to keep the LAN stable
  • Plug-and-play unmanaged design needs no software or configuration

Specifications

BrandTP-Link
ModelTL-SL1311MP
FormatDesktop
Network Management TypeUnmanaged
Primary Ports8x 10/100 Mbps 802.3af/at PoE+ Ports, 2x Gigabit RJ45 Ports, 1x Gigabit SFP Port
Primary Port Speed10/100/1000Mbps
MAC Address Table2K
Switching MethodStore and Forward
Jumbo Frames16KB
PoEYes
PowerExternal Power Supply: External Power Adapter (Output: 53.5VDC / 2.43A)
Max Power Consumption:
5.95 W (220/50 Hz. no PD connected)
140.92 W (220/50 Hz. with 124 W PD connected)
Dimensions8.2 x 4.9 x 1.0 in (209 x 126 x 26 mm)
Package ContentsTL-SL1311MP
Power Adapter
Installation Guide
Shipping weight1.54 kg
Package size314 × 239 × 69 mm

Questions about this item

How can I verify the TL-SL1311MP is delivering power to my IP cameras after connecting them?

Each PoE+ port has an LED indicator that lights when a powered device is detected and receiving up to 30 W; the total PoE budget is 124 W, so all eight ports active simultaneously will stay within that limit.

What accessories are included with the TL-SL1311MP and what must I purchase separately?

The box contains the switch, an external power adapter rated 53.5 VDC / 2.43 A, and an installation guide; you will need to buy Ethernet patch cables and any SFP transceiver module for the Gigabit SFP slot.

When should I choose the Extend Mode on this switch instead of the default setting?

Select Extend Mode when a camera or access point sits up to 250 m from the switch; the mode drops the link speed to 10 Mbps but maintains both data and PoE power over the longer cable run.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.