We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TP-Link

TP-Link TL-SG2210P 8-Port Gigabit PoE+ Smart Switch 61W 2 SFP

SKU CH-FC9M-29GME MPN TL-SG2210P

Eight-port Gigabit PoE+ smart switch with two SFP slots and a 61 W power budget

  • FormatDesktop
  • StandardsIEEE 802.3af, IEEE 802.3at
  • Network Management TypeSmart
  • Primary Ports8 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps
  • VLAN SupportYes
  • PoE+ powers devices with up to 30W per port
  • 61W total PoE budget supports multiple endpoints
  • 8 Gigabit RJ45 plus 2 SFP slots for flexible uplinks
  • Smart managed with VLAN, QoS and ACL features
  • Omada SDN integration enables centralised cloud management

Eight PoE+ ports with 61 W budget

The TL-SG2210P is a smart managed switch that delivers eight Gigabit RJ45 ports with PoE+ support and two Gigabit SFP slots for fibre uplinks. Each copper port can supply up to 30 W under IEEE 802.3at, while the total PoE power budget reaches 61 W. The desktop form factor targets small and medium businesses that need to power access points, IP cameras or VoIP phones without separate injectors.

Fanless desktop thermals and 61 W draw

The switch operates without a fan, so it runs silently in office or cabinet environments. Heat is dissipated through the metal enclosure while the unit draws up to 61 W from the mains to cover both switching and PoE loads. Power consumption scales with the number of powered devices attached, keeping idle draw low. No acoustic or thermal specifications beyond silent operation are provided.

Upgrade from unmanaged or non-PoE switches

This model replaces unmanaged Gigabit switches when VLANs, QoS, ACLs, static routing or SNMP monitoring become necessary. It also replaces non-PoE smart switches when PoE+ endpoints must be powered from the network core. The jump is worth it when a single device must handle both Layer 2/3 management and a 61 W PoE budget for up to eight endpoints.

PoE recovery and Omada SDN integration

The switch supports automatic PoE recovery that detects and reboots unresponsive powered devices without manual intervention. It integrates with the Omada SDN platform for centralised configuration, monitoring and firmware updates across multiple sites, using either a hardware controller, software controller or standalone mode. Cloud access via the Omada app enables remote management from any location. IPv6 and static routing are supported for modern network stacks.

Highlights

  • PoE+ powers devices with up to 30W per port
  • 61W total PoE budget supports multiple endpoints
  • 8 Gigabit RJ45 plus 2 SFP slots for flexible uplinks
  • Smart managed with VLAN, QoS and ACL features
  • Omada SDN integration enables centralised cloud management

Specifications

BrandTP-Link
ModelTL-SG2210P
FormatDesktop
StandardsIEEE 802.3af, IEEE 802.3at
Network Management TypeSmart
Primary Ports8 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
VLAN SupportYes
PoEYes
StackableYes
SNMPYes
QoSYes
Layer4
Features[Flexible Port Configuration [8x 10/100/1000 Mbps RJ45 PoE+ Port Switch with 2x Gigabit SFP Slots
[Power Over Ethernet[ 8x PoE+(802.3at/af) ports providing up to 30W per port, total PoE budget 58W and useful PoE power management Features
[Enhance Network Security[Advanced security features include 802.1Q Vlan, IP-MAC-Port binding, ACL, Port Security, DOS defend, Storm control, DHCP Snooping, 802.1X radius authentication
[Advanced Software Features[Prioritize your traffic and guarantee high quality of video or voice data transmission with L2/L3/L4 QoS, IGMP Snooping, Link aggregation
Shipping weight2.86 kg
Package size315 × 239 × 71 mm

Questions about this item

How do I install the TL-SG2210P and which step is often missed?

Connect the 8 PoE+ RJ45 ports and 2 SFP slots, then enable PoE on each port in the web UI — the step most users miss is activating PoE per port after physical connection.

What maintenance or replacement will the TL-SG2210P need later?

The fanless desktop unit has no moving parts to replace; only firmware updates via Omada SDN or web interface are required over its lifetime.

What limit appears first on the TL-SG2210P under sustained PoE load?

The 61 W total PoE budget caps simultaneous 30 W per-port delivery across all 8 ports, so full 30 W on every port cannot be sustained together.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.