TP-Link
TP-Link TL-SG1005P V2 5 Port Gigabit PoE Switch
A 5-port Gigabit switch with four PoE+ ports delivering up to 30W each and a 65W total budget, plus one non-PoE uplink, plug-and-play setup, QoS and IGMP snooping.
- TypeCable Modem
- Four PoE+ ports deliver up to 30 W each for cameras and phones
- 65 W total power budget runs multiple devices without extra adapters
- Plug-and-play operation needs no software or configuration
- Fanless metal chassis gives silent, reliable performance
- QoS and IGMP snooping prioritise voice and video traffic
Five-Port Gigabit PoE Switch
The TL-SG1005P V2 is a five-port unmanaged switch with four PoE+ ports and one standard Gigabit uplink. It delivers power and data over a single cable to devices such as access points, IP cameras or VoIP phones. The unit is aimed at small offices or home networks that need to place powered devices beyond reach of mains sockets.
65 W PoE Budget and Port Limits
The four PoE+ ports comply with IEEE 802.3 af/at and supply up to 30 W each, constrained by a total power budget of 65 W. All five RJ45 ports operate at 10/100/1000 Mbps with IEEE 802.3x flow control. Traffic can be prioritised through port-based 802.1p/DSCP QoS and IGMP snooping for smoother voice and video streams.
Fanless Desktop or Wall Mount
A sturdy metal case dissipates heat without a fan for silent operation. The switch works out of the box with no software installation or configuration required. Simply connect the power adapter and network cables; the ports auto-negotiate speed and detect PoE devices. Ensure the combined draw of attached devices stays within the 65 W budget to avoid power cycling.
Highlights
- Four PoE+ ports deliver up to 30 W each for cameras and phones
- 65 W total power budget runs multiple devices without extra adapters
- Plug-and-play operation needs no software or configuration
- Fanless metal chassis gives silent, reliable performance
- QoS and IGMP snooping prioritise voice and video traffic
Specifications
| Type | Cable Modem |
|---|
Questions about this item
Which PoE port count and power budget should I pick for four powered devices?
The switch provides four PoE+ ports with a 30 W per-port limit and a 65 W total budget, so four devices drawing up to 30 W each will exceed the budget; plan for a combined draw of 65 W or fewer.
What does the 65 W PoE budget mean when the switch is installed?
It is the maximum power the switch can deliver across all four PoE+ ports simultaneously; if connected devices request more, the switch will deny power to some ports to stay within 65 W.
What Gigabit standard do the RJ45 ports use and what throughput does it cap at?
The five RJ45 ports run at 10/100/1000 Mbps, so each link tops out at 1000 Mbps full-duplex per the IEEE 802.3 Ethernet standard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
