We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black TP-Link POE380S PoE++ injector with two RJ-45 ports

TP-Link

TP-Link POE380S Omada PoE++ Injector 90 W

SKU CH-91SV-1T9NH

Delivers up to 90 W PoE++ power with 10 Gb/s data passthrough via RJ-45 ports

  • Delivers up to 90 W for power-hungry devices
  • Compliant with IEEE 802.3 af/at/bt standards
  • Supports 10 Gb/s data passthrough
  • Single RJ-45 input and output ports
  • Wall-mount or desktop placement for flexible install

90 W PoE++ injector for IP devices

The TP-Link POE380S Omada PoE++ Injector delivers up to 90 W of power over Ethernet to compatible IP cameras, VoIP phones, and access points. It complies with IEEE 802.3 af/at/bt standards for broad device compatibility. This unit is designed for indoor use where a single powered device needs a PoE connection.

Wall or desktop mounting with 10 Gb/s passthrough

A single RJ-45 input port receives data and power from a non-PoE switch, while one RJ-45 output port supplies both to the end device. The injector supports 10 Gb/s passthrough data rates so network throughput is not limited. It can be wall mounted or placed on a desktop for flexible installation in different environments.

90 W output decides suitability

The 90 W maximum output determines whether this injector can power a specific device; check the powered device's maximum power draw before purchase. Buyers who need to supply more than 90 W or who require multiple output ports cannot use this model. The single-port design is intended for one powered device per injector.

Highlights

  • Delivers up to 90 W for power-hungry devices
  • Compliant with IEEE 802.3 af/at/bt standards
  • Supports 10 Gb/s data passthrough
  • Single RJ-45 input and output ports
  • Wall-mount or desktop placement for flexible install

Specifications

BrandTP-Link

Questions about this item

Does the injector pass through 10 Gb/s over the RJ-45 ports?

Yes, the POE380S supports 10 Gb/s passthrough data rates on both the input and output RJ-45 ports.

What mounting options does the POE380S provide?

It can be wall mounted or placed on a desktop for flexible installation.

How is the injector powered and connected to a PoE++ device?

Connect AC power, link the input port to your network switch, then plug the PoE++ device into the output port to deliver up to 90 W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.